{"id":66750,"date":"2024-05-19T12:33:31","date_gmt":"2024-05-19T10:33:31","guid":{"rendered":"https:\/\/panelsandwich.org\/how-thick-should-the-sandwich-panels-be\/"},"modified":"2026-10-12T21:07:39","modified_gmt":"2026-10-12T19:07:39","slug":"how-thick-should-the-sandwich-panels-be","status":"publish","type":"post","link":"https:\/\/panelsandwich.org\/en\/how-thick-should-the-sandwich-panels-be\/","title":{"rendered":"Sandwich panel thickness: what thickness to choose depending on use"},"content":{"rendered":"<p><strong>Sandwich panel thickness<\/strong> typically ranges from around 30\u201340 mm up to 200 mm. As a guideline: 30 mm for sheds and enclosures with no thermal requirements, 40\u201350 mm for warehouses and industrial buildings in mild climates, 60\u201380 mm for the food industry and homes (for a home roof, a minimum of 60 mm is recommended), and 100 to 200 mm for cold rooms and freezer rooms. <\/p>\n<p>The exact thickness depends on the temperature you want to maintain inside, the local climate, the core type, energy regulations, and the span between supports. More thickness means more insulation and more rigidity, but also a higher price. The idea is not to fall short and not to overpay.  <\/p>\n<h2>Guideline thickness table by use<\/h2>\n<table>\n<thead>\n<tr>\n<th>Use<\/th>\n<th>Guideline thickness<\/th>\n<th>Goal<\/th>\n<\/tr>\n<\/thead>\n<tbody>\n<tr>\n<td>Sheds, temporary enclosures, separating areas<\/td>\n<td>30 mm<\/td>\n<td>Basic insulation<\/td>\n<\/tr>\n<tr>\n<td>Standard logistics warehouse<\/td>\n<td>40\u201350 mm<\/td>\n<td>Basic protection and comfort<\/td>\n<\/tr>\n<tr>\n<td>Industrial buildings and garages in a mild area<\/td>\n<td>50 mm<\/td>\n<td>Medium insulation<\/td>\n<\/tr>\n<tr>\n<td>Home roof<\/td>\n<td>From 60 mm; more in cold climates<\/td>\n<td>Residential comfort<\/td>\n<\/tr>\n<tr>\n<td>Food industry<\/td>\n<td>60\u201380 mm<\/td>\n<td>Strict temperature control<\/td>\n<\/tr>\n<tr>\n<td>Cold rooms and freezer rooms<\/td>\n<td>100\u2013200 mm<\/td>\n<td>Maintain extreme cold<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<p>These are reference values. The final thickness comes from a thermal calculation for your specific case. <\/p>\n<h2>What determines the thickness you need<\/h2>\n<ol>\n<li><strong>Use of the space and indoor temperature.<\/strong>  It\u2019s not the same to have an unheated warehouse as a home or a freezer room. The higher the temperature you want to maintain in winter, or the lower in a cold room, the more thickness you need. <\/li>\n<li><strong>Local climate.<\/strong>  Look at the usual minimum and maximum temperatures and how long winter lasts. Areas with extreme temperatures call for more thickness. <\/li>\n<li><strong>Energy regulations.<\/strong>  In Spain, the Building Technical Code sets requirements by climate zone. The technical project calculates the required thermal transmittance and, from that, the thickness. <\/li>\n<li><strong>Core type.<\/strong>  At the same thickness, not all cores insulate the same. We cover it below. <\/li>\n<li><strong>Span between supports.<\/strong> Un panel m\u00e1s grueso es m\u00e1s r\u00edgido y permite separar m\u00e1s las correas.<\/li>\n<li><strong>Noise.<\/strong> Si necesitas aislamiento ac\u00fastico, el n\u00facleo y el espesor tambi\u00e9n cuentan.<\/li>\n<\/ol>\n<h2>Facade panel thickness vs. roof panel thickness<\/h2>\n<p>The roof usually needs one step more thickness than the facade. An example calculation with a mineral wool or polystyrene core, to maintain around 18\u00b0C indoors: <\/p>\n<ul>\n<li><strong>Area with long, cold winters:<\/strong> around 100 mm on walls and 150 mm on the roof.<\/li>\n<li><strong>Area with mild winters:<\/strong> around 80 mm on walls and 100 mm on the roof.<\/li>\n<li><strong>Premises kept at around 12\u00b0C:<\/strong> 80 mm on walls and 100 mm on the roof may be enough.<\/li>\n<\/ul>\n<p>With a polyurethane core, which insulates a bit more per centimetre, these values can be adjusted. To see available models and thicknesses, check the <a href=\"https:\/\/panelsandwich.org\/en\/sandwich-panel-facade\/\">sandwich facade panel<\/a> and the <a href=\"https:\/\/panelsandwich.org\/en\/sandwich-panel-for-roofing\/\">sandwich roof panel<\/a>. <\/p>\n<h2>Thickness and core type: it\u2019s not all about thickness<\/h2>\n<p>Two panels of the same thickness can insulate differently depending on their core:<\/p>\n<ul>\n<li><strong>Polyurethane (PUR) and PIR.<\/strong>  They insulate a bit more per centimetre than rock wool. They let you achieve the same insulation with less thickness. If you\u2019re unsure between cores, read the <a href=\"https:\/\/panelsandwich.org\/en\/what-is-the-difference-between-pir-and-eps-sandwich-panels\/\">differences between PIR and EPS<\/a>.  <\/li>\n<li><strong>Rock wool.<\/strong>  It insulates a bit less per centimetre than polyurethane, but it\u2019s fire-resistant and offers better acoustic insulation. It may need more thickness for the same thermal level. More information in <a href=\"https:\/\/panelsandwich.org\/en\/rock-wool-sandwich-panel\/\">rock wool sandwich panel<\/a>.  <\/li>\n<\/ul>\n<p>That\u2019s why the thermal calculation takes three data points into account: the type of premises, the climate (heating degree days), and the thermal resistance of the specific panel. With these, it\u2019s decided whether you need 60, 80, 100, 150, 200 mm or more. <\/p>\n<h2>Thickness, weight, and structure<\/h2>\n<p>A thicker panel weighs a bit more, but with a polyurethane core the increase is small. In conventional structures it usually doesn\u2019t require reinforcement. In return, you gain rigidity: you can space the purlins further apart.  <\/p>\n<p>If you need the weight per square metre or the span between supports for a specific model, ask us for its technical data sheet. You\u2019ll find general data in the <a href=\"https:\/\/panelsandwich.org\/en\/sandwich-panel-technical-information\/\">technical information on panels<\/a>. And before ordering, review <a href=\"https:\/\/panelsandwich.org\/en\/what-structure-you-need-before-installing-sandwich-panels\/\">what structure you need<\/a>.  <\/p>\n<h2>Thickness and panel dimensions<\/h2>\n<p>Thickness is only one of the dimensions. The length of each panel is made to measure for your roof or facade, so you don\u2019t have to adapt the job to standard pieces. To order correctly, measure the roof carefully and take overhangs and overlaps into account. We explain it in <a href=\"https:\/\/panelsandwich.org\/en\/how-to-measure-sandwich-panel-correctly\/\">how to take sandwich panel measurements<\/a>.   <\/p>\n<h2>Is it worth paying for more thickness?<\/h2>\n<p>The panel price depends directly on the core volume, so it increases with thickness. Even so, the increase is usually moderate compared to the savings on heating and cooling. Choosing a thickness slightly above the minimum required pays for itself in your bills. What doesn\u2019t make sense is oversizing without a calculation: you\u2019d be paying for insulation you won\u2019t use.   <\/p>\n<p>A practical tip: don\u2019t overlap two thin panels to add thickness. It complicates installation and creates thermal bridges. One single piece at the right thickness is always better.  <\/p>\n<h2>Frequently asked questions<\/h2>\n<h3>What is the minimum thickness for a roof?<\/h3>\n<p>For basic insulation and acceptable rigidity, 30 to 40 mm. For a home, the recommendation is at least 60 mm on the roof. <\/p>\n<h3>What panel thickness is used on a facade?<\/h3>\n<p>Usually one step less than on the roof of the same building. For example, 80 mm on the wall versus 100 mm on the roof in mild climates, depending on the core. <\/p>\n<h3>What thickness does a cold room need?<\/h3>\n<p>From 100 to 200 mm. The lower the indoor temperature, the more thickness. <\/p>\n<h3>How is the thickness of a ribbed or tile-effect panel measured?<\/h3>\n<p>The reference is the thickness of the insulating core, not counting the relief of the ribs or the tile profile. Check it on the technical data sheet for each model. <\/p>\n<h3>Does a thicker panel weigh much more?<\/h3>\n<p>Not much. With a polyurethane core the weight increase is small and it usually doesn\u2019t require reinforcement. <\/p>\n<p>Not sure what thickness to choose? <a href=\"https:\/\/panelsandwich.org\/en\/contact\/\">Request a no-obligation quote<\/a> or call us on 699 147 762. We\u2019ll recommend the right thickness and core for your job, we manufacture made-to-measure panels and, if you need it, we install them with our <a href=\"https:\/\/panelsandwich.org\/en\/assembly-service-starmodul\/\">installation service<\/a>. <\/p>\n","protected":false},"excerpt":{"rendered":"<p>Sandwich panel thickness typically ranges from around 30\u201340 mm up to 200 mm. As a guideline: 30 mm for sheds and enclosures with no thermal requirements, 40\u201350 mm for warehouses and industrial buildings in mild climates, 60\u201380 mm for the food industry and homes (for a home roof, a minimum of 60 mm is recommended), [&hellip;]<\/p>\n","protected":false},"author":5963,"featured_media":66744,"comment_status":"closed","ping_status":"closed","sticky":false,"template":"","format":"standard","meta":{"footnotes":""},"categories":[2977],"tags":[],"class_list":["post-66750","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-sandwich-panels-en"],"_links":{"self":[{"href":"https:\/\/panelsandwich.org\/en\/wp-json\/wp\/v2\/posts\/66750","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/panelsandwich.org\/en\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/panelsandwich.org\/en\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/panelsandwich.org\/en\/wp-json\/wp\/v2\/users\/5963"}],"replies":[{"embeddable":true,"href":"https:\/\/panelsandwich.org\/en\/wp-json\/wp\/v2\/comments?post=66750"}],"version-history":[{"count":0,"href":"https:\/\/panelsandwich.org\/en\/wp-json\/wp\/v2\/posts\/66750\/revisions"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/panelsandwich.org\/en\/wp-json\/wp\/v2\/media\/66744"}],"wp:attachment":[{"href":"https:\/\/panelsandwich.org\/en\/wp-json\/wp\/v2\/media?parent=66750"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/panelsandwich.org\/en\/wp-json\/wp\/v2\/categories?post=66750"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/panelsandwich.org\/en\/wp-json\/wp\/v2\/tags?post=66750"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}