{"id":68814,"date":"2025-01-04T09:57:26","date_gmt":"2025-01-04T08:57:26","guid":{"rendered":"https:\/\/panelsandwich.org\/find-out-how-to-transform-your-old-corrugated-iron-roof-into-a-modern-sandwich-panel-with-panelsandwich-org\/"},"modified":"2026-10-29T22:18:42","modified_gmt":"2026-10-29T21:18:42","slug":"find-out-how-to-transform-your-old-corrugated-iron-roof-into-a-modern-sandwich-panel-with-panelsandwich-org","status":"publish","type":"post","link":"https:\/\/panelsandwich.org\/en\/find-out-how-to-transform-your-old-corrugated-iron-roof-into-a-modern-sandwich-panel-with-panelsandwich-org\/","title":{"rendered":"Replacing a uralite roof with sandwich panels: steps and regulations"},"content":{"rendered":"<p>Yes, you can replace a uralite roof with sandwich panels, and it\u2019s one of the most common roof refurbishments for industrial units, farms, and homes. The order is always the same. First, a company registered with RERA (Register of Companies with Asbestos Risk), with a work plan approved by the competent authorities, removes the sheets. Then the structure is checked and the new panel is installed.   <\/p>\n<p>And installing the sandwich panel over the uralite? Technically, it\u2019s possible to encapsulate it, but the recommended option is to remove it completely to avoid future problems. Below you\u2019ll find the reasons, the steps, the permits, and which panel to choose.  <\/p>\n<h2>Why it\u2019s worth replacing uralite<\/h2>\n<p>Uralite is fibre cement. It was widely used in past decades and today it\u2019s an obsolete material. These are its issues:  <\/p>\n<ul>\n<li><strong>Asbestos.<\/strong> It almost always contains asbestos, a carcinogenic fibrous mineral whose use has been prohibited in Spain since 2002. If the sheets have cracks or breaks, they can release particles into the air. <\/li>\n<li><strong>Almost no insulation.<\/strong> Transmite el fr\u00edo y el calor al interior.<\/li>\n<li><strong>A lot of weight.<\/strong> Necesita una estructura de soporte importante.<\/li>\n<li><strong>Leaks.<\/strong> Con los a\u00f1os aparecen fisuras, filtraciones y humedades que se repiten.<\/li>\n<li><strong>Aged appearance.<\/strong> Afecta a la imagen y al valor del inmueble.<\/li>\n<\/ul>\n<p>If your roof is old, treat it as if it could contain asbestos until a professional confirms it. You\u2019ll find more detail in our article on <a href=\"https:\/\/panelsandwich.org\/en\/what-is-the-problem-with-fiber-cement\/\">the fibre-cement problem<\/a>. <\/p>\n<h2>Fibre cement vs sandwich panels<\/h2>\n<table>\n<thead>\n<tr>\n<th>Feature<\/th>\n<th>Uralite roof (fibre cement)<\/th>\n<th>Sandwich panel roof<\/th>\n<\/tr>\n<\/thead>\n<tbody>\n<tr>\n<td>Thermal insulation<\/td>\n<td>None or poor<\/td>\n<td>High, thanks to the insulating core<\/td>\n<\/tr>\n<tr>\n<td>Weight on the structure<\/td>\n<td>Very high<\/td>\n<td>Lightweight, reduces the load<\/td>\n<\/tr>\n<tr>\n<td>Watertightness<\/td>\n<td>Prone to cracks and leaks<\/td>\n<td>Watertight if properly fixed and finished<\/td>\n<\/tr>\n<tr>\n<td>Health and safety<\/td>\n<td>Risk from breakage and fibres if it contains asbestos<\/td>\n<td>Asbestos-free<\/td>\n<\/tr>\n<tr>\n<td>Aesthetics<\/td>\n<td>Aged<\/td>\n<td>Wide range of colours and finishes<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<h2>Is it mandatory to remove uralite?<\/h2>\n<p>Today there is no general date that obliges an individual to remove it, but Waste Law 7\/2022 obliges local councils to register facilities with asbestos and to set a removal schedule. It must be removed, or acted upon, when: <\/p>\n<ul>\n<li>It\u2019s deteriorated: it has damage, cracks, or breaks that can release particles.<\/li>\n<li>It has reached the end of its service life.<\/li>\n<li>You\u2019re going to carry out work that affects it, such as replacing the roof.<\/li>\n<li>It poses a health risk.<\/li>\n<\/ul>\n<p>Requirements can vary by municipality, so check with your local council before deciding.<\/p>\n<h2>Who can remove uralite<\/h2>\n<p>Removing asbestos-containing sheets, known as asbestos removal, can only be done by a company registered with RERA, with workers trained and equipped in line with regulations. Before starting, the company must have its work plan approved by the competent authorities. It\u2019s not a job you can do yourself.  <\/p>\n<p>This is what a proper removal looks like:<\/p>\n<ol>\n<li>Manual dismantling of the sheets, without breaking them or subjecting them to harsh friction.<\/li>\n<li>Airtight packaging of the removed material.<\/li>\n<li>Transport to an authorised landfill for hazardous waste.<\/li>\n<\/ol>\n<p>Before hiring, ask the company for its RERA registration, the approved work plan, and how it will manage the waste.<\/p>\n<h2>Steps to replace a uralite roof with sandwich panels<\/h2>\n<ol>\n<li><strong>Initial assessment.<\/strong> Se revisa el estado de la cubierta, la superficie, los accesos y la estructura, y se decide qu\u00e9 panel conviene.<\/li>\n<li><strong>Permits.<\/strong> You need a building permit or prior notification, depending on the municipality, and the approved asbestos work plan. Depending on the municipality and the work, they may ask for a technical project and process it as a major work. <\/li>\n<li><strong>Removal of the uralite.<\/strong> La hace la empresa inscrita en el RERA, siguiendo su plan de trabajo.<\/li>\n<li><strong>Structural inspection.<\/strong> The metal or concrete purlins and the timber beams are checked and repaired. If needed, they are levelled. <\/li>\n<li><strong>Installation of the sandwich panel.<\/strong> Los paneles se fijan directamente sobre la estructura limpia y nivelada.<\/li>\n<li><strong>Finishing details and final check.<\/strong> Se colocan los remates y se comprueba que todas las uniones queden estancas.<\/li>\n<\/ol>\n<p>Because sandwich panels weigh much less than uralite, the existing structure usually works with minor levelling adjustments. Even so, always check it. Here we explain <a href=\"https:\/\/panelsandwich.org\/en\/what-structure-you-need-before-installing-sandwich-panels\/\">what structure you need before installing sandwich panels<\/a>.  <\/p>\n<h2>Can you install sandwich panels over uralite?<\/h2>\n<p>It\u2019s one of the most common questions. Technically, you can encapsulate uralite with a new roof over the top, but it\u2019s not recommended. The advisable option is to remove the old material completely. The reasons:   <\/p>\n<ul>\n<li>The asbestos remains inside the building. The problem doesn\u2019t go away, it\u2019s just postponed. <\/li>\n<li>To fix the panel, you have to work on the old sheets. Drilling, cutting, or walking on them can break them and release fibres. <\/li>\n<li>The structure would have to support the weight of the uralite plus the new panel.<\/li>\n<li>You miss the chance to inspect and repair the structure.<\/li>\n<\/ul>\n<p>If this solution is still proposed, have it assessed by a technician and carried out by a company registered with RERA, because it is also asbestos work.<\/p>\n<h2>Which panel to choose to replace uralite<\/h2>\n<ul>\n<li><strong>Industrial units and warehouses:<\/strong> <a href=\"https:\/\/panelsandwich.org\/en\/sandwich-panel-for-roofing\/\">roof sandwich panel<\/a>, ribbed or with cover flashing. It\u2019s lightweight and insulates well. <\/li>\n<li><strong>Livestock farms and agricultural buildings:<\/strong> the <a href=\"https:\/\/panelsandwich.org\/en\/sandwich-panel-for-farms-agropanel\/\">Agropanel<\/a>, our sandwich panel designed for livestock farms.<\/li>\n<li><strong>Homes and porches:<\/strong> the tile-effect panel, if you want a traditional roof look.<\/li>\n<\/ul>\n<p>Before installing, check that your roof has the minimum pitch required by the chosen model. This is especially important for tile-effect panels. <\/p>\n<h2>Price and timelines<\/h2>\n<p>There\u2019s no fixed price for replacing uralite with sandwich panels. The cost depends on: <\/p>\n<ul>\n<li>The roof area.<\/li>\n<li>The condition of the uralite and accessibility, which affect the asbestos removal.<\/li>\n<li>The type and thickness of the panel.<\/li>\n<li>The condition of the structure and any adjustments it needs.<\/li>\n<li>Finishing details and accessories.<\/li>\n<\/ul>\n<p>To get an idea of the installation part, see <a href=\"https:\/\/panelsandwich.org\/en\/how-much-does-sandwich-panel-installation-cost\/\">how much sandwich panel installation costs<\/a>. For a real figure, request a quote with your measurements. <\/p>\n<p>As for timelines, removal and installation on a medium-sized industrial unit are usually completed in a few days. As a reference, a specialised team can remove and install between 150 and 300 m\u00b2 per day, depending on the job. <\/p>\n<p>Sometimes there are regional or EU grants for energy refurbishment and the removal of obsolete materials like uralite. Check the current calls in your region before you start. <\/p>\n\n<figure class=\"wp-block-embed is-type-video is-provider-youtube wp-block-embed-youtube wp-embed-aspect-16-9 wp-has-aspect-ratio\"><div class=\"wp-block-embed__wrapper\">\n<iframe title=\"Renueva Tu Techo  Uralita A Panel Sandwich\" width=\"800\" height=\"450\" src=\"https:\/\/www.youtube.com\/embed\/J7jVveC0OyM?feature=oembed\" frameborder=\"0\" allow=\"accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture; web-share\" referrerpolicy=\"strict-origin-when-cross-origin\" allowfullscreen><\/iframe>\n<\/div><\/figure>\n<h2>Frequently asked questions<\/h2>\n<h3>Can I remove uralite myself?<\/h3>\n<p>No. Removing asbestos-containing sheets must be done by a company registered with RERA, with trained workers and an approved work plan. <\/p>\n<h3>What happens to the removed uralite?<\/h3>\n<p>It is sealed in airtight packaging and taken to an authorised landfill for hazardous waste.<\/p>\n<h3>Will the old structure work for the new panel?<\/h3>\n<p>In most cases, yes, because sandwich panels weigh much less and fit metal or concrete purlins. It must be checked and, sometimes, levelled or repaired. <\/p>\n<h3>Do I need permission from the local council?<\/h3>\n<p>Yes. You need a building permit or prior notification, depending on the municipality, and the approved asbestos work plan. Depending on the municipality, they may also ask for a technical project.  <\/p>\n<h3>Do you handle removal and installation as a single job?<\/h3>\n<p>Yes. We coordinate the entire job: the fibre cement removal is carried out by a partner company registered with RERA, with its work plan approved, and then we install the new sandwich panels. That way, you have a single point of contact for the whole refurbishment.  <\/p>\n<p>Want to replace your uralite roof? Send us the measurements and a few photos of the roof and we&#8217;ll advise you on the most suitable panel. <a href=\"https:\/\/panelsandwich.org\/en\/contact\/\">Request a no-obligation quote<\/a> or call 699 147 762. We also handle <a href=\"https:\/\/panelsandwich.org\/en\/assembly-service-starmodul\/\">sandwich panel installation<\/a>.  <\/p>\n","protected":false},"excerpt":{"rendered":"<p>Yes, you can replace a uralite roof with sandwich panels, and it\u2019s one of the most common roof refurbishments for industrial units, farms, and homes. The order is always the same. First, a company registered with RERA (Register of Companies with Asbestos Risk), with a work plan approved by the competent authorities, removes the sheets. [&hellip;]<\/p>\n","protected":false},"author":5963,"featured_media":68808,"comment_status":"closed","ping_status":"closed","sticky":false,"template":"","format":"standard","meta":{"footnotes":""},"categories":[2977],"tags":[],"class_list":["post-68814","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-sandwich-panels-en"],"_links":{"self":[{"href":"https:\/\/panelsandwich.org\/en\/wp-json\/wp\/v2\/posts\/68814","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/panelsandwich.org\/en\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/panelsandwich.org\/en\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/panelsandwich.org\/en\/wp-json\/wp\/v2\/users\/5963"}],"replies":[{"embeddable":true,"href":"https:\/\/panelsandwich.org\/en\/wp-json\/wp\/v2\/comments?post=68814"}],"version-history":[{"count":0,"href":"https:\/\/panelsandwich.org\/en\/wp-json\/wp\/v2\/posts\/68814\/revisions"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/panelsandwich.org\/en\/wp-json\/wp\/v2\/media\/68808"}],"wp:attachment":[{"href":"https:\/\/panelsandwich.org\/en\/wp-json\/wp\/v2\/media?parent=68814"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/panelsandwich.org\/en\/wp-json\/wp\/v2\/categories?post=68814"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/panelsandwich.org\/en\/wp-json\/wp\/v2\/tags?post=68814"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}