{"id":72312,"date":"2025-12-20T09:33:33","date_gmt":"2025-12-20T08:33:33","guid":{"rendered":"https:\/\/panelsandwich.org\/key-considerations-for-installing-sandwich-panel-roofing\/"},"modified":"2026-11-09T10:46:36","modified_gmt":"2026-11-09T09:46:36","slug":"key-considerations-for-installing-sandwich-panel-roofing","status":"publish","type":"post","link":"https:\/\/panelsandwich.org\/en\/key-considerations-for-installing-sandwich-panel-roofing\/","title":{"rendered":"Minimum slope and key considerations for installing sandwich panels on roofs"},"content":{"rendered":"<div style=\"background-color: #f4f5f7; font-family: 'Segoe UI', Roboto, Helvetica, Arial, sans-serif; line-height: 1.6; color: #333333; padding: 20px;\">\n<div style=\"max-width: 800px; margin: 0 auto; background-color: #ffffff; border-radius: 8px; padding: 40px; box-shadow: 0 10px 40px -10px rgba(16, 24, 40, 0.15); border-top: 5px solid #fba905;\">\n<p style=\"margin-bottom: 18px; color: #444;\">The minimum slope for a sandwich panel roof depends on the model: <strong style=\"color: #101828;\">5% for concealed-fastener panels<\/strong>, <strong style=\"color: #101828;\">from 5% for ribbed panels<\/strong> (3 or 5 ribs), and <strong style=\"color: #101828;\">10% for tile-effect panels<\/strong>. Below that slope, water does not drain properly and the overlaps may leak. This guide covers the key factors for installing a watertight roof: slope, structure, fasteners, overlaps, and flashings.  <\/p>\n<h2 style=\"color: #101828; font-size: 1.6rem; margin-top: 40px; margin-bottom: 20px; border-bottom: 2px solid #eee; padding-bottom: 10px; font-weight: 700;\">Minimum slope by panel type<\/h2>\n<div style=\"overflow-x: auto;\">\n<table style=\"width: 100%; border-collapse: collapse; margin: 30px 0; border-radius: 6px; overflow: hidden; box-shadow: 0 2px 10px rgba(0,0,0,0.05); background-color: #fff;\">\n<thead>\n<tr style=\"background-color: #101828; color: #ffffff;\">\n<th style=\"padding: 15px; text-align: left; text-transform: uppercase; font-size: 0.85rem; letter-spacing: 0.5px;\">Panel<\/th>\n<th style=\"padding: 15px; text-align: left; text-transform: uppercase; font-size: 0.85rem; letter-spacing: 0.5px;\">Minimum slope<\/th>\n<th style=\"padding: 15px; text-align: left; text-transform: uppercase; font-size: 0.85rem; letter-spacing: 0.5px;\">Notes<\/th>\n<\/tr>\n<\/thead>\n<tbody>\n<tr style=\"border-bottom: 1px solid #eee;\">\n<td style=\"padding: 15px; color: #101828; font-weight: bold;\"><a href=\"https:\/\/panelsandwich.org\/en\/sandwich-panel-deck-flashing-4-grooves\/\" style=\"color: #101828; text-decoration: none; border-bottom: 2px solid #fba905; font-weight: 600;\">Concealed-fastener roof<\/a><\/td>\n<td style=\"padding: 15px; color: #333;\">5%<\/td>\n<td style=\"padding: 15px; color: #333;\">The cover conceals the joint: the most suitable option for low slopes.<\/td>\n<\/tr>\n<tr style=\"border-bottom: 1px solid #eee;\">\n<td style=\"padding: 15px; color: #101828; font-weight: bold;\"><a href=\"https:\/\/panelsandwich.org\/en\/roof-sandwich-panel-3-ribs\/\" style=\"color: #101828; text-decoration: none; border-bottom: 2px solid #fba905; font-weight: 600;\">3-rib<\/a> and <a href=\"https:\/\/panelsandwich.org\/en\/sandwich-panel-deck-5-ribs\/\" style=\"color: #101828; text-decoration: none; border-bottom: 2px solid #fba905; font-weight: 600;\">5-rib roof<\/a><\/td>\n<td style=\"padding: 15px; color: #333;\">from 5%<\/td>\n<td style=\"padding: 15px; color: #333;\">For long roof slopes, increase the pitch or seal the overlaps.<\/td>\n<\/tr>\n<tr style=\"border-bottom: 1px solid #eee;\">\n<td style=\"padding: 15px; color: #101828; font-weight: bold;\"><a href=\"https:\/\/panelsandwich.org\/en\/tile-sandwich-panel\/\" style=\"color: #101828; text-decoration: none; border-bottom: 2px solid #fba905; font-weight: 600;\">Tile-effect panel<\/a><\/td>\n<td style=\"padding: 15px; color: #333;\">10%<\/td>\n<td style=\"padding: 15px; color: #333;\">The tile profile retains more water: requires greater inclination.<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n<div style=\"background-color: #fff8e6; border-left: 4px solid #fba905; padding: 16px 20px; margin: 25px 0; border-radius: 0 6px 6px 0; color: #444;\">To convert from percentage to degrees: 10% equals approximately 5.7\u00b0 and 5% equals approximately 2.9\u00b0. That is, 10 cm or 5 cm of rise per metre of roof slope. <\/div>\n<h2 style=\"color: #101828; font-size: 1.6rem; margin-top: 40px; margin-bottom: 20px; border-bottom: 2px solid #eee; padding-bottom: 10px; font-weight: 700;\">Support structure<\/h2>\n<p style=\"margin-bottom: 18px; color: #444;\">The panel rests on steel or timber purlins, never on a continuous deck. It can be installed over: <\/p>\n<ul style=\"margin: 0 0 20px 0; padding-left: 22px;\">\n<li style=\"margin-bottom: 10px; color: #444;\"><strong style=\"color: #101828;\">Steel structure<\/strong> with <a href=\"https:\/\/panelsandwich.org\/en\/structural-steel-purlins\/\" style=\"color: #101828; text-decoration: none; border-bottom: 2px solid #fba905; font-weight: 600;\">C, Z, or omega purlins<\/a>.<\/li>\n<li style=\"margin-bottom: 10px; color: #444;\"><strong style=\"color: #101828;\">Timber structure<\/strong>, using timber-specific screws.<\/li>\n<li style=\"margin-bottom: 10px; color: #444;\"><strong style=\"color: #101828;\">Existing slabs or roofs<\/strong> in refurbishment projects, over new battens or purlins.<\/li>\n<\/ul>\n<p style=\"margin-bottom: 18px; color: #444;\">Purlin spacing depends on panel thickness, snow and wind loads, and the number of supports. Each product sheet includes its load tables. If you still need to design the structure, start with the <a href=\"https:\/\/panelsandwich.org\/en\/what-structure-you-need-before-installing-sandwich-panels\/\" style=\"color: #101828; text-decoration: none; border-bottom: 2px solid #fba905; font-weight: 600;\">steel structure guide for sandwich panels<\/a>.  <\/p>\n<h2 style=\"color: #101828; font-size: 1.6rem; margin-top: 40px; margin-bottom: 20px; border-bottom: 2px solid #eee; padding-bottom: 10px; font-weight: 700;\">Fasteners and hardware<\/h2>\n<ul style=\"margin: 0 0 20px 0; padding-left: 22px;\">\n<li style=\"margin-bottom: 10px; color: #444;\">Use <a href=\"https:\/\/panelsandwich.org\/en\/sandwich-panel-screws\/\" style=\"color: #101828; text-decoration: none; border-bottom: 2px solid #fba905; font-weight: 600;\">self-drilling screws with EPDM washers<\/a>, selected according to the substrate: steel purlin, timber, or concrete.<\/li>\n<li style=\"margin-bottom: 10px; color: #444;\">Always screw into the top of the rib, never into the valley where water runs.<\/li>\n<li style=\"margin-bottom: 10px; color: #444;\">Tighten until the washer is compressed, but without deforming it: over-tightening compromises the seal.<\/li>\n<li style=\"margin-bottom: 10px; color: #444;\">Reinforce fastening at panel ends and roof edges, which are the areas most exposed to wind. Follow the layout in the technical data sheet. <\/li>\n<\/ul>\n<h2 style=\"color: #101828; font-size: 1.6rem; margin-top: 40px; margin-bottom: 20px; border-bottom: 2px solid #eee; padding-bottom: 10px; font-weight: 700;\">Overlaps and installation direction<\/h2>\n<ol style=\"margin: 0 0 20px 0; padding-left: 22px;\">\n<li style=\"margin-bottom: 10px; color: #444;\">Start at the eaves and work upward toward the ridge.<\/li>\n<li style=\"margin-bottom: 10px; color: #444;\">Install against the prevailing wind, so that lateral rain does not enter through the overlap.<\/li>\n<li style=\"margin-bottom: 10px; color: #444;\">If a roof slope requires two panels lengthwise, the upper panel overlaps the lower one. For low slopes, seal that overlap with <a href=\"https:\/\/panelsandwich.org\/en\/mounting-accessory-butyl-tape\/\" style=\"color: #101828; text-decoration: none; border-bottom: 2px solid #fba905; font-weight: 600;\">butyl tape<\/a>. <\/li>\n<li style=\"margin-bottom: 10px; color: #444;\">Remove the protective film immediately after installing each panel. Exposed to sunlight, the adhesive bonds to the sheet. <\/li>\n<\/ol>\n<h2 style=\"color: #101828; font-size: 1.6rem; margin-top: 40px; margin-bottom: 20px; border-bottom: 2px solid #eee; padding-bottom: 10px; font-weight: 700;\">Flashings and accessories<\/h2>\n<p style=\"margin-bottom: 18px; color: #444;\">A roof is not watertight with panels alone. It requires its <a href=\"https:\/\/panelsandwich.org\/en\/sandwich-panel-trim\/\" style=\"color: #101828; text-decoration: none; border-bottom: 2px solid #fba905; font-weight: 600;\">metal flashings<\/a>, in the same colour as the panel: <\/p>\n<ul style=\"margin: 0 0 20px 0; padding-left: 22px;\">\n<li style=\"margin-bottom: 10px; color: #444;\"><strong style=\"color: #101828;\">Ridge<\/strong>, plain or perforated, at the roof apex.<\/li>\n<li style=\"margin-bottom: 10px; color: #444;\"><strong style=\"color: #101828;\">Side flashings<\/strong> at the roof slope edges.<\/li>\n<li style=\"margin-bottom: 10px; color: #444;\"><strong style=\"color: #101828;\">Wall flashings<\/strong> where the roof meets a wall.<\/li>\n<li style=\"margin-bottom: 10px; color: #444;\"><strong style=\"color: #101828;\">Gutter and drip edge<\/strong> to collect water at the eaves.<\/li>\n<li style=\"margin-bottom: 10px; color: #444;\"><strong style=\"color: #101828;\">Cover strips, chimney caps, and rooflights<\/strong> at singular points.<\/li>\n<\/ul>\n<p style=\"margin-bottom: 18px; color: #444;\">You will find all models under <a href=\"https:\/\/panelsandwich.org\/en\/sandwich-panel-for-roofing\/\" style=\"color: #101828; text-decoration: none; border-bottom: 2px solid #fba905; font-weight: 600;\">roof sandwich panels<\/a> and the most common mistakes in <a href=\"https:\/\/panelsandwich.org\/en\/common-mistakes-when-installing-sandwich-panels\/\" style=\"color: #101828; text-decoration: none; border-bottom: 2px solid #fba905; font-weight: 600;\">common errors when installing sandwich panels<\/a>.<\/p>\n<h2 style=\"color: #101828; font-size: 1.6rem; margin-top: 40px; margin-bottom: 20px; border-bottom: 2px solid #eee; padding-bottom: 10px; font-weight: 700;\">Frequently asked questions<\/h2>\n<div style=\"background-color: #f8f9fa; border-left: 4px solid #fba905; padding: 20px; margin-bottom: 15px; border-radius: 0 6px 6px 0;\">\n<h3 style=\"display: block; font-weight: bold; color: #101828; margin: 0 0 8px 0; font-size: 1rem; line-height: 1.6;\">What is the minimum slope for roof sandwich panels?<\/h3>\n<p style=\"margin: 0; color: #555;\">5% for concealed-fastener and ribbed panels, and 10% for tile-effect panels.<\/p>\n<\/div>\n<div style=\"background-color: #f8f9fa; border-left: 4px solid #fba905; padding: 20px; margin-bottom: 15px; border-radius: 0 6px 6px 0;\">\n<h3 style=\"display: block; font-weight: bold; color: #101828; margin: 0 0 8px 0; font-size: 1rem; line-height: 1.6;\">Can sandwich panels be installed on a flat roof?<\/h3>\n<p style=\"margin: 0; color: #555;\">It is not recommended below the model&#8217;s minimum slope. With less inclination, water pools in the ribs and eventually enters through the overlaps and fasteners. <\/p>\n<\/div>\n<div style=\"background-color: #f8f9fa; border-left: 4px solid #fba905; padding: 20px; margin-bottom: 15px; border-radius: 0 6px 6px 0;\">\n<h3 style=\"display: block; font-weight: bold; color: #101828; margin: 0 0 8px 0; font-size: 1rem; line-height: 1.6;\">What goes underneath a sandwich panel?<\/h3>\n<p style=\"margin: 0; color: #555;\">Only the purlin structure. The panel already incorporates the insulation and inner sheet, so it does not require a deck or membrane underneath. In residential buildings you can add a false ceiling or choose a timber interior finish.  <\/p>\n<\/div>\n<div style=\"background-color: #f8f9fa; border-left: 4px solid #fba905; padding: 20px; margin-bottom: 15px; border-radius: 0 6px 6px 0;\">\n<h3 style=\"display: block; font-weight: bold; color: #101828; margin: 0 0 8px 0; font-size: 1rem; line-height: 1.6;\">How many screws does a sandwich panel require per m\u00b2?<\/h3>\n<p style=\"margin: 0; color: #555;\">It depends on purlin spacing and wind zone. As a guide, between 3 and 4 screws per m\u00b2. <\/p>\n<\/div>\n<div style=\"background-color: #f8f9fa; border-left: 4px solid #101828; padding: 20px; margin: 30px 0; border-radius: 0 6px 6px 0;\"><span style=\"display: block; font-weight: bold; color: #101828; margin-bottom: 5px; text-transform: uppercase; font-size: 0.85rem; letter-spacing: 0.5px;\">Need a quote?<\/span><\/p>\n<p style=\"margin: 0; color: #555;\">Would you like us to review your roof? Send us the area, slope, and existing structure, and we will prepare the panel layout, flashings, and hardware specification. <a href=\"https:\/\/panelsandwich.org\/en\/contact\/\" style=\"color: #101828; text-decoration: none; border-bottom: 2px solid #fba905; font-weight: 600;\">Request a quote<\/a> or consult our <a href=\"https:\/\/panelsandwich.org\/en\/assembly-service-starmodul\/\" style=\"color: #101828; text-decoration: none; border-bottom: 2px solid #fba905; font-weight: 600;\">installation service<\/a>. <\/p>\n<\/div>\n<\/div>\n<\/div>\n","protected":false},"excerpt":{"rendered":"<p>The minimum slope for a sandwich panel roof depends on the model: 5% for concealed-fastener panels, from 5% for ribbed panels (3 or 5 ribs), and 10% for tile-effect panels. Below that slope, water does not drain properly and the overlaps may leak. This guide covers the key factors for installing a watertight roof: slope, [&hellip;]<\/p>\n","protected":false},"author":5963,"featured_media":72313,"comment_status":"closed","ping_status":"closed","sticky":false,"template":"","format":"standard","meta":{"footnotes":""},"categories":[2977],"tags":[],"class_list":["post-72312","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-sandwich-panels-en"],"_links":{"self":[{"href":"https:\/\/panelsandwich.org\/en\/wp-json\/wp\/v2\/posts\/72312","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/panelsandwich.org\/en\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/panelsandwich.org\/en\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/panelsandwich.org\/en\/wp-json\/wp\/v2\/users\/5963"}],"replies":[{"embeddable":true,"href":"https:\/\/panelsandwich.org\/en\/wp-json\/wp\/v2\/comments?post=72312"}],"version-history":[{"count":0,"href":"https:\/\/panelsandwich.org\/en\/wp-json\/wp\/v2\/posts\/72312\/revisions"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/panelsandwich.org\/en\/wp-json\/wp\/v2\/media\/72313"}],"wp:attachment":[{"href":"https:\/\/panelsandwich.org\/en\/wp-json\/wp\/v2\/media?parent=72312"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/panelsandwich.org\/en\/wp-json\/wp\/v2\/categories?post=72312"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/panelsandwich.org\/en\/wp-json\/wp\/v2\/tags?post=72312"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}