973 228 164 · 699 147 762

Support Phone Number

Made to measure

Technical advice

Delivery to site

Specialist installation

SANDWICH PANEL · CONFIGURATION AND QUOTE

Tile-Effect Sandwich Panel for Farms

Configure your panel

Select the available options. We will prepare the price based on dimensions, quantity, transport and installation.

PERSONALISED QUOTE

Request a price for this product

Tell us the panel type, area, thickness, location and whether you need supply only or installation. We’ll review the details to prepare a tailored proposal.

QUICK REQUEST

Tell us what you need

Complete the main details and we will prepare a proposal tailored to your project.

PRODUCT DESCRIPTION

Tile-Effect Sandwich Panel for Farms

Tile-effect sandwich panel for farms

The tile-effect sandwich panel for farms combines the aesthetics of a tiled roof with the performance of an insulated panel designed for agricultural environments. The polyester inner face provides resistance to moisture and aggressive environments.

This tile-effect agropanel, also searched as agricultural tile-effect sandwich panel, is intended for pitched roofs where, in addition to insulation, a traditional appearance is sought.

The technical documentation consulted establishes a slope greater than 10 % and allows the thickness to be chosen according to the thermal requirements of the project.

Check all sandwich panel for farms models and compare the different agropanel solutions.

Characteristics of the Tile-Effect Sandwich Panel for Farms

Application

Panel for pitched roofs in farms and agricultural buildings. The exterior geometry replicates the appearance of a traditional tiled roof.

Dimensions and Geometry

Effective width1,000 mm
Recommended maximum length15,050 mm
Minimum pitchGreater than 10%
Approximate module represented166 mm

Composition

  • Exterior face: pre-lacquered steel or aluminum sheet, depending on configuration.
  • Core: rigid polyurethane foam (PUR).
  • Interior face: polyester sheet.
  • Joint: visible fastening.
  • Indicated fire reaction: F classification according to EN 13501-1.

Finishes and coatings

The technical documentation includes different coatings for the metallic exterior face, including polyester, PVDF, PVC, and PET finishes, as well as other configurations upon consultation.

The interior face is made of polyester sheet, with reference grammages of 1,250 g/m² and 600 g/m² depending on the documented range.

The availability of finishes and colors must be confirmed for each thickness, length, and quantity.

Installation of the Tile-Effect Sandwich Panel for Farms

Joint of the tile-effect sandwich panel for farms: wave overlap and exposed screw on the crest
Fixing with exposed screws.

Installation must be carried out on a correctly dimensioned structure, respecting a pitch greater than 10% and the panel’s modulation.

  • The main fastening remains visible.
  • Use screws with a sealing washer suitable for the support.
  • Correctly resolve overlaps, ridges, sides, eaves, and junctions.
  • Avoid damaging the interior polyester sheet during handling.
  • The spans between supports must be checked according to the project load.

DECLARED PERFORMANCE

Technical data for the tile-effect sandwich panel for farms

Published technical data

ThicknessWeightU with joint factorU without joint factor
30 mm6.59 kg/m²0.69 W/m²K0.74 W/m²K
40 mm7.14 kg/m²0.52 W/m²K0.57 W/m²K

Values published for the configuration with a steel exterior face.

Recommended maximum spans

Values from the technical data sheet for a steel outer face: spans in metres and loads in daN/m².

Multi-span

Thickness60 daN/m²80 daN/m²100 daN/m²120 daN/m²150 daN/m²200 daN/m²250 daN/m²
30 mm1,040,910,820,750,680,590,53
40 mm1,110,970,880,800,720,630,57

Bi-supported

Thickness60 daN/m²80 daN/m²100 daN/m²120 daN/m²150 daN/m²200 daN/m²250 daN/m²
30 mm1,681,471,331,221,090,950,85
40 mm1,751,531,381,271,140,990,89

These values are for reference and do not replace the structural calculation of the project.

TECHNICAL DATA SHEET

Technical datasheet · Tile-Effect Sandwich Panel for Farms

Download the data sheet with composition, dimensions, thermal performance and recommended spans.

TECHNICAL IMAGES

Details of the Tile-Effect Sandwich Panel for Farms

QUESTIONS

Frequently asked questions about Tile-Effect Sandwich Panel for Farms

It is an insulated roof panel with an exterior tile-shaped finish and an interior configuration oriented towards agricultural installations.

The technical documentation used for this datasheet indicates a slope greater than 10 %.

Yes. It is part of the family of panels for farms and aggressive environments, with a polyester inner face.

It integrates cladding and insulation in a single element, reducing installation operations and providing an exterior finish with a traditional appearance.

It should be chosen according to thermal requirements, the spacing between supports and the project conditions.

The technical documentation used for this datasheet declares an effective width of 1,000 mm.

ROOF FLASHINGS

Trims and accessories for Tile-Effect Sandwich Panel for Farms

Complete the roof with compatible flashings and accessories. You can also check all sandwich panel for farms models.

LATEST ARTICLES

Guides and advice on sandwich panels

Explore content on panel selection, insulation, installation, maintenance, refurbishment and real-world applications.

ON-SITE SERVICE

Specialist team for sandwich panel installation

We quote for new builds, refurbishment, roof and facade replacement, flashing installation, and work with sheet metal or skylights.

The quote depends on geometry, height, access, auxiliary equipment, location, fixings and junctions the job must resolve.

Sandwich panel installation on site