Contact Email
Support Phone Number
SANDWICH PANEL CATALOGUE
Consult available products, compare models, and request a quote for quantities, special lengths, transport, or installation.
CATEGORY PRODUCTS
Ver por tipo:
















CATEGORY INFORMATION
Tile-effect sandwich panel flashings — Pre-painted steel flashings in the same colour as the tile-effect panel: tile red (RT series), slate grey RAL 7022 (RG series) and aged ochre (RA series). They finish ridges, sides, eaves and joints without spoiling the tiled-roof look.
Each series has the same pieces. The number gives the type of flashing and the letters the colour: for example, RT1015 is the die-cut ridge in tile red and RA1015 the same piece in aged ochre.
| Roof area | Flashing | Code |
|---|---|---|
| Ridge of a dual-pitch roof | Die-cut ridge or smooth ridge | 1015 / 1016 |
| Free side edge | Side flashing | 1011 |
| Side edge against a wall | Side wall flashing | 1013 |
| Top of a mono-pitch roof against a wall | Die-cut rear flashing | 1014 |
| Front of the panel at the eaves | Front end cap | 1012 |
| Walls and parapets | Coping | 1017 |
| Inside corners | Inside L-flashing 10 × 10 | 1019 |
| Outside corners | Outside L-flashing 10 × 10 and 5 × 7 | 1020 / 1021 |
Measure the ridge, side edges, eaves and wall joints in metres. Each 3 m piece covers about 2.9 m with the overlap. Divide each length by 2.9 and round up. If in doubt, send us the roof dimensions and we will draw up the list.
See the tile-effect sandwich panel, the ridge flashings, the side flashings and the flashing screws.
You can, but the roof loses its tiled look. We recommend the series in the same colour as the panel.
The die-cut ridge copies the tile shape and closes the gaps by itself. The smooth one is more versatile, but the gaps are closed with foam or sealant.
Tile red and aged ochre, yes. Slate grey is made to order.
Send us the dimensions of the job or a sketch and we will prepare the materials list. Write to us from the contact page or call +34 699 147 762.
PERSONALISED QUOTE
Tell us the panel type, area, thickness, location and whether you need supply only or installation. We’ll review the details to prepare a tailored proposal.
SANDWICH PANEL SERVICE
In addition to the product, we can quote for flashing, fixings, sealing, skylights, transport and auxiliary equipment.
The final selection should consider use, thickness, spacing between supports, loads, exposure environment and project requirements.
Help choosing the panel, thickness, finish, fixings and flashing.
Transport coordinated according to lengths, quantities, destination and unloading.
Price tailored to the product, quantities, accessories, transport and installation.
Assessment of auxiliary equipment, flashings, junctions and work sequence.
OTHER CATEGORIES
Go straight to the main panel and sheet metal families available.
Residential finish for homes, porches and refurbishment.
Insulated panel for industrial, agricultural and residential roofs.
Vertical cladding with visible or concealed screws.
Agropanel for livestock and agricultural environments.
Solution for cold rooms and temperature-controlled spaces.
Options with specific fire and acoustic performance.
Insulation and a natural decorative look.
Lightweight profiles for roofs and enclosures.
ON-SITE SERVICE
We quote for new builds, refurbishment, roof and facade replacement, flashing installation, and work with sheet metal or skylights.
The quote depends on geometry, height, access, auxiliary equipment, location, fixings and junctions the job must resolve.