Contact Email
Support Phone Number
PERSONALISED QUOTE
Tell us the panel type, area, thickness, location and whether you need supply only or installation. We’ll review the details to prepare a tailored proposal.
QUICK REQUEST
Complete the main details and we will prepare a proposal tailored to your project.
Compact Crystal polycarbonate sheets offer significant advantages over traditional glazing materials in terms of lightness, impact resistance and transparency.
Crystal Compact polycarbonate sheets can be thermoformed and special geometries can be obtained. They are also equipped with U.V. protection on both sides, which allows them to be used outdoors.
The fastening system must allow the free expansion of the sheet, therefore rigid fasteners or through bolts are not recommended.
The sheets require a longitudinal and/or transversal support structure, which can be of any nature or geometry. In the modulation, the maximum dimensions of the sheet must be respected, according to its thickness and the loads to be supported, and be compatible with an adequate cutting to its dimensions.
The compact polycarbonate sheets can be fixed to the structure by means of various procedures: with universal or structural profiles and within the rebates of the carpentry elements. The sheets are protected by a film on both sides. When it is necessary to seal the joints, the compatibility of the polycarbonate with the sealant must be ensured; the use of neutral silicone is highly recommended in these cases.
| Thickness | 3 mm | 4 mm | 5 mm |
|---|---|---|---|
| Width (mm) | 2,050 | 2,050 | 2,050 |
| Length (mm) | 3,050 | 3,050 | 3,050 |
| Light transmission, clear (%) | 88 | 87 | 87 |
| Light transmission, ice (%) | 56 | 48 | 42 |
| Thermal transmittance U (W/m²·K) | 5.5 | 5.3 | 5.2 |
| Sound insulation (dB) | 26 | 27 | 28 |
| Minimum bending radius (mm) | 450 | 600 | 750 |
| Reaction to fire | B-s1,d0 | B-s1,d0 | B-s1,d0 |
YOU MAY ALSO BE INTERESTED IN
ON-SITE SERVICE
We quote for new builds, refurbishment, roof and facade replacement, flashing installation, and work with sheet metal or skylights.
The quote depends on geometry, height, access, auxiliary equipment, location, fixings and junctions the job must resolve.