E-mail de contacto
Teléfono de soporte
E-mail de contacto
Teléfono de soporte
PANEL SANDWICH · CONFIGURACIÓN Y PRESUPUESTO
Selecciona las opciones disponibles. Te prepararemos el precio según medidas, cantidad, transporte y montaje.
Standard Cellular Polycarbonate Panels are polycarbonate sheets with honeycomb structures that provide the product with insulation and resistance. All polycarbonate sheets are protected from ultraviolet rays by co-extrusion of U.V. absorbers on the outer face.
REQUEST PRICE AND TECHNICAL INFORMATION
The fastening system must allow the free expansion of the sheet, therefore rigid fastenings or fastenings with through bolts are not recommended. Always provide sufficient clearance between the bore and the screw.
Whenever possible, ribs should be provided in the direction of the maximum slope of the sheet to ensure minimum dust accumulation in the cavities.
The sheets require a longitudinal and/or transversal support structure that can be of any nature or geometry. In the modulation, the maximum dimensions of the sheet must be respected according to the thickness of the loads to be supported, making them compatible with an adequate cutting.
The sheets are protected by a film on both sides indicating which side is protected from solar radiation.
When it is necessary to seal the joints, the compatibility of the polycarbonate with the sealant must be ensured (neutral silicone is recommended).
It is essential to cover the cells to prevent dust from entering the interior of the sheet. Aluminum tape is recommended at the ends: smooth at the top and porous, allowing condensation water to drain out at the bottom.
If it is necessary to perforate the sheet, fastening buttons should be used.
TAMBIÉN TE PUEDE INTERESAR
SERVICIO DE OBRA
Valoramos obra nueva, rehabilitación, sustitución de cubiertas y fachadas, colocación de rematería y trabajos con chapa o lucernarios.
El presupuesto depende de la geometría, altura, accesos, medios auxiliares, ubicación, fijaciones y encuentros que deba resolver la obra.
PRESUPUESTO PERSONALIZADO
Indica tipo de panel, superficie, espesor, localidad y si necesitas suministro o montaje. Revisaremos los datos para preparar una propuesta ajustada.
SOLICITUD RÁPIDA
Completa los datos principales y prepararemos una propuesta ajustada a tu proyecto.
