Contact Email
Support Phone Number
PERSONALISED QUOTE
Tell us the panel type, area, thickness, location and whether you need supply only or installation. We’ll review the details to prepare a tailored proposal.
QUICK REQUEST
Complete the main details and we will prepare a proposal tailored to your project.
The sheets require a longitudinal and/or transversal support structure that can be of any nature or geometry. In the modulation, the maximum dimensions of the sheet must be respected according to the thickness of the loads to be supported, making them compatible with an adequate cutting.
When it is necessary to seal the joints, the compatibility of the polycarbonate with the sealant must be ensured (neutral silicone is recommended).
It is essential to cover the cells to prevent dust from entering the interior of the sheet. Aluminum tape is recommended at the ends: smooth at the top and porous, allowing condensation water to drain out at the bottom.
If it is necessary to perforate the sheet, fastening buttons should be used.
Swipe the table
| Thickness | 4 mm | 6 mm | 8 mm | 10 mm | 16 mm |
|---|---|---|---|---|---|
| Structure | 2W | 2W | 2W | 2W | 5X |
| Width (mm) | 2,100 | 2,100 | 2,100 | 1,220 / 2,100 | 1,220 / 2,100 |
| Length (mm) | 6,000 | 6,000 | 6,000 | 6,000 / 7,000 | 6,000 / 7,000 |
| Light transmission, clear (%) | 82 | 80 | 80 | 80 | 62 |
| Light transmission, ice (%) | 64 | 60 | 60 | 55 | 35 |
| Thermal transmittance U (W/m²·K) | 3.9 | 3.5 | 3.2 | 3.0 | 2.0 |
| Sound insulation (dB) | 14 | 15 | 16 | 19 | 21 |
| Minimum bending radius (mm) | 750 | 1,000 | 1,250 | 1,500 | 2,400 |
| Reaction to fire | B-s1,d0 | B-s1,d0 | B-s1,d0 | B-s1,d0 | B-s1,d0 |
YOU MAY ALSO BE INTERESTED IN
ON-SITE SERVICE
We quote for new builds, refurbishment, roof and facade replacement, flashing installation, and work with sheet metal or skylights.
The quote depends on geometry, height, access, auxiliary equipment, location, fixings and junctions the job must resolve.