Contact Email
Support Phone Number
SANDWICH PANEL CATALOGUE
Consult available products, compare models, and request a quote for quantities, special lengths, transport, or installation.
CATEGORY PRODUCTS
Ver por tipo:
CATEGORY INFORMATION
Ridge Vents and Skylights — Ridge vents and skylights add ventilation and natural lighting to a sandwich panel roof. In deep-plan industrial and other buildings, they can significantly improve the quality of the indoor space by bringing in overhead light or helping to exhaust hot air that builds up at high level.
Guide to choosing ridge vents and skylights
Their installation should be treated as a critical roof detail. The opening, support, perimeter trims and sealing must work together to keep the roof watertight. A skylight or ridge vent that is correctly chosen but poorly integrated can become a weak point for water ingress.
In this category you will find solutions for sandwich panel skylights, roof ridge vents, industrial roof ventilation. The aim is to make it easier to choose the main product, the supporting structure, the accessories and the finishing details as a coherent whole, rather than deciding on each element in isolation.
Main advantages
Natural light through the roof.
Improved ventilation of indoor spaces.
Integration into industrial, agricultural and ancillary roofs.
A functional addition to refurbishment and new-build projects.
Most common applications and uses
The right solution depends on the type of building, the environment, the performance required and the geometry of the project. The most common applications include:
Industrial buildings, workshops and logistics centres.
Warehouses and buildings with little side light.
Farms and agricultural facilities.
Roofs that need natural ventilation or overhead lighting.
How do you choose the right solution?
Before choosing a model, check the dimensions, roof type, pitch and compatibility with the panel profile. If the skylight opens, you also need to define the opening system and plan trims that shed water away from the opening.
You should also check the technical data sheets for the specific model and make sure the chosen solution suits the actual site conditions. On projects with structural, thermal, acoustic or fire-protection requirements, the decision must be based on the relevant technical documentation and on the judgement of the project engineer.
Complete the system with the right components
To put together a complete solution you can look at rooflights and polycarbonate, roof sandwich panels, roof trims and installation accessories. These internal links let you compare related options and find the accessories you need to finish the installation properly.
Planning, installation and the final result
A good result starts before the material arrives. Measuring accurately, preparing a logical cutting list, arranging unloading and lifting equipment and organising the installation in phases all help to reduce cuts, downtime and unnecessary handling. Coordinating panels, structure, trims and fixings is especially important when parts are made to specific lengths.
At PanelSandwich.org you can compare different product families and ask for advice on specifying the material according to the dimensions, quantities and needs of your project. Where needed, it helps to send drawings, photos or a sketch of the site so that the critical details can be checked more precisely.
Frequently asked questions about ridge vents and skylights
Can a skylight be installed on any panel?
It is fitted over an opening cut in the roof panel or sheet and sealed with trims and butyl tape. Tell us the panel model and thickness so we can prepare it with the right junction.
What is the difference between a rooflight and a skylight?
A rooflight is a polycarbonate sheet with the same rib profile that replaces a panel in a run. A skylight is a single unit over an opening, which can also open for ventilation or roof access.
What types of skylight do you offer?
Fixed, manual opening, electric and roof access.
What is a ridge vent for?
To extract hot air and moisture from industrial buildings, farms and warehouses through the ridge, with no motor. It helps to reduce condensation. See the ridge vent.
Need to calculate materials or compare options?
Tell us the dimensions, site location, type of application and the performance you need. You can also use the contact page to request a quote tailored to your project.
PERSONALISED QUOTE
Tell us the panel type, area, thickness, location and whether you need supply only or installation. We’ll review the details to prepare a tailored proposal.
SANDWICH PANEL SERVICE
In addition to the product, we can quote for flashing, fixings, sealing, skylights, transport and auxiliary equipment.
The final selection should consider use, thickness, spacing between supports, loads, exposure environment and project requirements.
Help choosing the panel, thickness, finish, fixings and flashing.
Transport coordinated according to lengths, quantities, destination and unloading.
Price tailored to the product, quantities, accessories, transport and installation.
Assessment of auxiliary equipment, flashings, junctions and work sequence.
OTHER CATEGORIES
Go straight to the main panel and sheet metal families available.
Residential finish for homes, porches and refurbishment.
Insulated panel for industrial, agricultural and residential roofs.
Vertical cladding with visible or concealed screws.
Agropanel for livestock and agricultural environments.
Solution for cold rooms and temperature-controlled spaces.
Options with specific fire and acoustic performance.
Insulation and a natural decorative look.
Lightweight profiles for roofs and enclosures.
ON-SITE SERVICE
We quote for new builds, refurbishment, roof and facade replacement, flashing installation, and work with sheet metal or skylights.
The quote depends on geometry, height, access, auxiliary equipment, location, fixings and junctions the job must resolve.