Contact Email
Support Phone Number
PERSONALISED QUOTE
Tell us the panel type, area, thickness, location and whether you need supply only or installation. We’ll review the details to prepare a tailored proposal.
QUICK REQUEST
Complete the main details and we will prepare a proposal tailored to your project.
The 2019 is a inside L-flashing for trapezoidal and standing-seam roof sandwich panels. It is a 10 × 10 cm sheet-metal angle for internal corners. It covers the joint between two panels that meet at an inward angle and gives a clean finish.
It is made in the same colours as the roof panel, so the flashing blends in with the roof.

| Reference | 2019 |
|---|---|
| Type | Inside L-flashing |
| Where it is used | Internal corners and joints between walls. |
| Panel | Trapezoidal and standing-seam roof sandwich panels |
| Material | Pre-painted galvanised steel sheet |
| Thickness | 0.6 mm |
| Colour | White RAL 9010, red RAL 3009, green RAL 6005, metallic grey RAL 9006, slate grey RAL 7024, blue RAL 5019 and cream RAL 1015 |
| Size | Legs of 10 × 10 cm |
| Piece length | 3 m |
| Sold | By the linear metre |
| Availability | The most common colours are in stock; the rest are made to order. |
| Fixing | Flashing screws |

Measure the total length of the joint you need to cover, in metres. Each piece is 3 m long and overlaps the next one by about 10 cm, so it covers about 2.9 m. Divide the length by 2.9 and round up. For example, for 12 m you need 12 ÷ 2.9 = 4.1, that is, 5 pieces.
If your project needs a different girth, another colour or a special fold, we make the flashing to measure. Send us a sketch with the dimensions and we will prepare a quote.
They are the legs of the angle in centimetres: 10 cm on one side and 10 cm on the other.
The internal one goes in inside corners, where the angle points inwards. The external one goes on projecting corners and edges. The direction of the fold is different.
See also all sandwich panel flashings. Need a price? Ask for a quote or call us on +34 699 147 762 · WhatsApp.
YOU MAY ALSO BE INTERESTED IN
ON-SITE SERVICE
We quote for new builds, refurbishment, roof and facade replacement, flashing installation, and work with sheet metal or skylights.
The quote depends on geometry, height, access, auxiliary equipment, location, fixings and junctions the job must resolve.