973 228 164 · 699 147 762

Support Phone Number

Made to measure

Technical advice

Delivery to site

Specialist installation

SANDWICH PANEL · CONFIGURATION AND QUOTE

3000 – U-Channel Flashing – Cold Room Panel 40-80

Configure your panel

Select the available options. We will prepare the price based on dimensions, quantity, transport and installation.

PERSONALISED QUOTE

Request a price for this product

Tell us the panel type, area, thickness, location and whether you need supply only or installation. We’ll review the details to prepare a tailored proposal.

QUICK REQUEST

Tell us what you need

Complete the main details and we will prepare a proposal tailored to your project.

Description: 3000 – U-Channel Flashing – Cold Room Panel 40-80

The 3000 is a U-channel flashing for cold-room sandwich panels. It wraps around the edge of the cold-room panel to close it and protect the insulating core. It is used at the base, at the top of walls, on free edges and around door openings, wherever the panel is cut.

It is made in white RAL 9010, matching the faces of the cold-room panels.

Characteristics

Reference3000
TypeU-channel flashing
Where it is usedPanel edges: base, top, openings and free edges.
PanelCold-room sandwich panels
MaterialPre-painted galvanised steel sheet
Thickness0.6 mm
ColourWhite RAL 9010
SizeFor panels of 40, 50, 60 and 80 mm
Piece length3 m
SoldBy the linear metre
AvailabilityMade to order.
FixingFlashing screws

How to install it

  1. Choose the profile that matches the panel thickness; for example, a 60 profile for a 60 mm panel.
  2. Fit the profile around the edge of the panel. If you use it as a base track, fix it to the floor first so it acts as a guide.
  3. Fix the legs to the panel faces with flashing screws or rivets every 30–50 cm.
  4. Seal the joint between the profile and the panel with a silicone suited to the use.

Installation tips

  • In cold rooms, take care with the sealing: an open joint is a thermal bridge and a place where dirt collects.
  • Used as a base track on the floor, it helps to align the panels and keep them plumb during installation.
  • Cut the sheet with snips or a fine-tooth saw, never with an angle grinder: the sparks burn the paint and the sheet ends up rusting.

How many pieces do you need?

Measure the total length of the joint you need to cover, in metres. Each piece is 3 m long and overlaps the next one by about 10 cm, so it covers about 2.9 m. Divide the length by 2.9 and round up. For example, for 12 m you need 12 ÷ 2.9 = 4.1, that is, 5 pieces.

Made-to-measure flashings

If your project needs a different girth, another colour or a special fold, we make the flashing to measure. Send us a sketch with the dimensions and we will prepare a quote.

Frequently asked questions

Which profile size do I need?

The one matching your panel thickness: the inside of the U must match the thickness of the panel so it grips the edge properly. This model is available for panels of 40, 50, 60 and 80 mm.

Can I order it in another colour?

It is made in white RAL 9010, the usual colour for cold rooms. If you need another one, ask us.

See also all sandwich panel flashings. Need a price? Ask for a quote or call us on +34 699 147 762 · WhatsApp.

ON-SITE SERVICE

Specialist team for sandwich panel installation

We quote for new builds, refurbishment, roof and facade replacement, flashing installation, and work with sheet metal or skylights.

The quote depends on geometry, height, access, auxiliary equipment, location, fixings and junctions the job must resolve.

Sandwich panel installation on site