SANDWICH PANEL · CONFIGURATION AND QUOTE

3017 – Top Coping Flashing

Configure your panel

Select the available options. We will prepare the price based on dimensions, quantity, transport and installation.

Exterior Color

Metal Sheet Thickness

Stock / On Request

Type of Measure

Clear

Made to measure

Technical advice

Delivery to site

Specialist installation

PERSONALISED QUOTE

Request a price for this product

Tell us the panel type, area, thickness, location and whether you need supply only or installation. We’ll review the details to prepare a tailored proposal.

QUICK REQUEST

Tell us what you need

Complete the main details and we will prepare a proposal tailored to your project.

683 442 608 683 442 608 info@starmodul.com

First name

Phone

Email (optional)

Delivery city

Project details

Panel type

Service

Approximate area

Thickness

Attach plans or photos

Data protection

I have read and accept the legal and data protection information.

Description: 3017 – Top Coping Flashing

The 3017 is a top coping flashing for façade sandwich panels. It covers the top of walls and parapets. It protects the top of the wall or panel from rain, and its legs run down both faces so water cannot get into the joint.

It is made in the same colours as the façade panel, so the flashing blends in with the cladding.

Characteristics

Reference	3017
Type	Top coping flashing
Where it is used	Tops of walls and parapets.
Panel	Façade sandwich panels
Material	Pre-painted S250GD galvanised steel sheet
Thickness	0.6 mm
Colour	White RAL 9010, red RAL 3009, green RAL 6005, metallic grey RAL 9006, slate grey RAL 7024, blue RAL 5019 and cream RAL 1015
Piece length	3 m
Sold	By the linear metre
Availability	The most common colours are in stock; the rest are made to order.
Fixing	Flashing screws

How to install it

Check that the top of the wall is clean and level; if needed, fit a support batten.
Place the coping centred on the wall, with the legs running down both faces.
Overlap the pieces by about 10 cm and seal the overlap with a bead of sealant or with butyl tape.
Fix the legs with flashing screws if the wall is panel or sheet metal, or with plugs and screws if it is masonry, every 30–50 cm.

Installation tips

Give it a slight fall towards the roof side so the water does not stain the façade.
Measure the total width of the wall including finishes: if it does not match the standard coping, we make it to measure.
Cut the sheet with snips or a fine-tooth saw, never with an angle grinder: the sparks burn the paint and the sheet ends up rusting.

How many pieces do you need?

Measure the total length of the joint you need to cover, in metres. Each piece is 3 m long and overlaps the next one by about 10 cm, so it covers about 2.9 m. Divide the length by 2.9 and round up. For example, for 12 m you need 12 ÷ 2.9 = 4.1, that is, 5 pieces.

Made-to-measure flashings

If your project needs a different girth, another colour or a special fold, we make the flashing to measure. Send us a sketch with the dimensions and we will prepare a quote.