Contact Email
Support Phone Number
PERSONALISED QUOTE
Tell us the panel type, area, thickness, location and whether you need supply only or installation. We’ll review the details to prepare a tailored proposal.
QUICK REQUEST
Complete the main details and we will prepare a proposal tailored to your project.
The RT1011 is a side flashing for tile red tile-effect sandwich panels. It closes the free side edge of the roof slope: it covers the last rib of the panel and runs down the edge to the wall, so the insulation is protected from rain, wind and sun.
It comes in the same colour as the tile-effect panel, so the flashing goes unnoticed and the roof keeps its tiled look.

| Reference | RT1011 |
|---|---|
| Type | Side flashing |
| Where it is used | Side edges of the roof that do not end against a wall. |
| Panel | Tile red tile-effect sandwich panels |
| Material | Pre-painted galvanised steel sheet |
| Thickness | 0.50 mm |
| Colour | Tile red, matching the tile red tile-effect panel |
| Piece length | 3 m |
| Sold | By the linear metre |
| Availability | In stock in our warehouse. |
| Fixing | Flashing screws |

Measure the total length of the joint you need to cover, in metres. Each piece is 3 m long and overlaps the next one by about 10 cm, so it covers about 2.9 m. Divide the length by 2.9 and round up. For example, for 12 m you need 12 ÷ 2.9 = 4.1, that is, 5 pieces.
If your project needs a different girth, another colour or a special fold, we make the flashing to measure. Send us a sketch with the dimensions and we will prepare a quote.
The side flashing is used when the edge of the roof is free, open to the air. The side wall flashing is used when the slope ends against a higher wall and the joint with the wall has to be sealed.
Yes. At the edge of the panel the insulation is exposed and the last rib is open. Without a flashing, water, wind and insects get in, and the foam deteriorates in the sun.
See also side flashings for sandwich panels and all sandwich panel flashings. Need a price? Ask for a quote or call us on +34 699 147 762 · WhatsApp.
YOU MAY ALSO BE INTERESTED IN
ON-SITE SERVICE
We quote for new builds, refurbishment, roof and facade replacement, flashing installation, and work with sheet metal or skylights.
The quote depends on geometry, height, access, auxiliary equipment, location, fixings and junctions the job must resolve.