The price of sandwich panel per m² is not fixed. It mainly depends on the type of panel (roof, facade, tile imitation or refrigerator), the type and thickness of the insulating core, the sheet thickness, the finish, and how many meters you order. In addition, steel and insulation components vary with the market, so the price changes over time.
For reference, indicative market ranges go from about €16/m² for a simple facade panel to about €55/m² for a high-end refrigerator panel, material only. These are not a fixed rate: each order is custom-made and the actual amount depends on your project. To find out how much it will cost you, the reliable way is to request a quote with your measurements.
Indicative sandwich panel price per m²
This table summarizes approximate market ranges by panel type. Use it only to get an idea before requesting a quote.
| Panel Type | Economy Range (€/m²) | Premium Range (€/m²) |
|---|---|---|
| Flashing Cover | 19 – 23 | 26 – 36 |
| Facade (visible fixing) | 16 – 20 | 23 – 29 |
| Tile imitation | 25 – 29 | 32 – 42 |
| Refrigerator | 28 – 35 | 40 – 55 |
How to read the table:
- These are indicative values and fluctuate with raw material prices.
- They refer to the supply of the panel. They do not include assembly, transport, trims or screws.
- The premium range usually corresponds to greater insulation thickness, thicker sheet metal or special finishes.
For rock wool panel, wood imitation finish or slate imitation, we do not provide a range. Its price depends heavily on the thickness and finish, so it is advisable to calculate it for your specific case.
How much does a 6-meter sandwich panel cost?
The panel is custom-made, so the price of a piece depends on its length. To estimate it, multiply the length by the effective width and by the price per m² for its type. For example, a 6-meter roof panel with an effective width of 1 meter equals 6 m². Using the ranges in the table, it would cost approximately between €114 and €216 per panel, supply only.
Always order the exact length you need. By being custom-made, you avoid unnecessary cuts and overlaps, which make the work more expensive and are weak points for leaks. You can find the lengths, widths, and thicknesses for each model in our sandwich panel dimensions guide.
What makes the price per m² go up or down
Two panels that look the same can have very different prices. These are the most important factors.
Panel type according to its use
Each panel is designed for a specific need and its price reflects that performance. The roof panel is in high demand and usually has a competitive price. The refrigerator panel is more expensive because it is designed for cold rooms and high insulation areas. The tile imitation also costs more than a standard roof panel due to its finish.
For facades, the fixing system influences the price. Visible fixing is more economical and faster to install. Hidden fixing seeks a cleaner finish and can bring the price closer to that of the roof.
Insulating core thickness
The greater the thickness, the more insulation and the higher the cost per m². The most common thicknesses are 30, 40, 50, 60, 80, 100 and 120 mm.
Core type
- Polyurethane (PUR): the most common option and, in general, the most economical.
- PIR: better fire performance than PUR.
- Rock wool: a more technical panel, very good against fire and for acoustic insulation. It is usually the most expensive.
Sheet thickness
Thinner sheets (0.4 mm) are cheaper than 0.5 mm or thicker ones. A thicker sheet makes the panel more expensive.
Finish and color
The standard Pyrenean white lacquer is the most economical. Colors such as red or green, textured finishes, wood imitation and tile imitation have an extra cost due to the painting process. Specific interior finishes for the food industry or cold rooms also influence the price.
Quantity of meters
The greater the volume, the better the price per m². For small orders, the unit cost and transport cost are usually higher, because they are spread over fewer meters.
What the price per m² does not include
The price per square meter of the panel is only part of the budget. To avoid surprises, also add:
- Trims: ridges, sides and other pieces that guarantee watertightness. They are usually quoted separately from the panels. You can see options in sandwich panel trims.
- Screws and accessories: fixings, flashing and joints.
- Transport: depends on volume and distance. It is bulky material, does not go by standard parcel service and requires adapted trucks. If you order it, we take care of transport to the site.
- Assembly: specialized labor, tools and lifting equipment, such as baskets or vacuum lifters. Its cost depends on the height, access, surface and complexity of the structure. We explain it in how much sandwich panel installation costs.
How to calculate your budget step by step
To do it in a minute, use our sandwich panel calculator: it tells you how many panels, m², purlins and screws you need. If it’s a roof, the 3D roof configurator adds flashings, guttering and skylights, and lets you download the breakdown as a PDF.
- Measure the surface and lengths. You need the total m² and the length of each panel. If you have doubts, follow this guide to take sandwich panel measurements.
- Define the use. Cubierta, fachada, tejado con aspecto de teja o cámara frigorífica.
- Choose core and thickness. Ajusta el espesor a lo que de verdad necesitas aislar.
- Choose finish and color. Ten en cuenta que los colores y acabados especiales suben el precio.
- Add trims, screws and accessories. Pedirlos en el mismo pedido suele ahorrar costes de envío.
- Decide if you need transport and assembly. Indica la ubicación de la obra y cómo son los accesos.
- Request a quote with all this data. Cuanta más información des, más ajustado será el precio.
Tips to avoid overpaying
If your budget is tight, ask about stock material, remnants and off-cuts or second-quality panels. We explain this on our cheap sandwich panel page.
- Order custom-cut panels. Así no pagas material que acabarás tirando.
- Choose the right thickness. There’s no point in a 100 mm refrigerator panel for a garage: 30 or 40 mm is usually enough there. For standard storage warehouses, 40 to 50 mm is usually a good balance between cost and insulation.
- Buy everything together. Paneles, remates y tornillería en el mismo pedido.
- Don’t decide based on price alone. A low-quality panel may be cheaper, but it will also last much less. This translates into more maintenance and replacements in the long term.
What about second-hand sandwich panels?
Buying used panels seems like a way to save money. In practice, cheap usually turns out expensive. These are the main reasons:
- Dimensions: the panel comes with the length, thickness and profile of the previous project. If it doesn’t fit your structure, you’ll have to cut and waste material, which is the opposite of ordering custom-made panels.
- Damage: the core only performs well if the material is in good condition. The sheet metal and trims protect the insulation from moisture; if there are bumps or damage, that protection weakens.
- Warranty: manufacturers offer a warranty on new panels, and it’s advisable to have a good warranty to avoid problems. For a used panel, check if it retains any. If not, any fault is your responsibility.
- Trim compatibility: to ensure watertightness, it is recommended to use original system trims and accessories. With a panel of unknown origin, finding trims that fit its profile can be complicated.
Frequently asked questions
How much does a 6-meter sandwich panel weigh?
A 3-rib roof panel with 30 mm thickness weighs approximately 7.7 kg/m² according to its technical datasheet. A panel 6 m long and 1 m useful width (6 m²) therefore weighs around 46 kg. With greater insulation thickness or thicker sheet metal it weighs slightly more; you’ll find this in the table on each datasheet.
Which is cheaper, roof tiles or sandwich panels?
Typically the sandwich panel: the panel already includes the insulation and is installed much faster than a ceramic tile roof, which requires separate boarding, insulation and waterproofing. We compare them in tile or sandwich panel: which is better.
Where to buy cheap sandwich panels?
If budget is your priority, check out cheap sandwich panels: stock, clearance and seconds for roofing, facades and profiled sheeting. We explain how to place your order in buying sandwich panels, and if you’re torn between a big-box store and a custom order, see Leroy Merlin, Obramat or custom-made.
Does the price per meter include assembly?
No. The prices per m² refer to the supply of the material. Installation is quoted separately.
Why does the price of sandwich panel change?
Because the cost of steel and the chemical components of insulation vary with the market. These variations affect the final product.
Is facade panel cheaper than roof panel?
It depends on the system. In the indicative ranges, the visible fixing facade is slightly below the roof. Hidden fixing or special finishes can bring it closer or exceed it.
Does buying more meters lower the price?
Yes. With more volume, the price per m² usually decreases and transport is better distributed. For small orders, the unit cost is higher.
Does color influence the cost?
Yes. Pyrenean white is the most economical standard. Colors like red, green or wood imitations have an extra cost.
Is it more expensive than single sheet metal?
The initial investment is higher, but the insulated panel reduces energy costs in the medium and long term thanks to its insulation. You can see the differences between insulated panel and single sheet metal.
Do you want to know how much your roof or facade costs? Request your quote with the measurements, use, thickness and finish you need, or call us at 699 147 762. We advise you to adjust the cost and, if you need it, we take care of transport to the site and panel assembly.


