Contact Email
Support Phone Number
PERSONALISED QUOTE
Tell us the panel type, area, thickness, location and whether you need supply only or installation. We’ll review the details to prepare a tailored proposal.
QUICK REQUEST
Complete the main details and we will prepare a proposal tailored to your project.
The RG1014 is a die-cut rear flashing for slate grey tile-effect sandwich panels. It closes the top of a mono-pitch roof that ends against a wall. Its die-cut edge follows the shape of the panel ribs and closes the gaps between them.
It comes in the same colour as the tile-effect panel, so the flashing goes unnoticed and the roof keeps its tiled look.

| Reference | RG1014 |
|---|---|
| Type | Die-cut rear flashing |
| Where it is used | Top of mono-pitch roofs that end against a wall. |
| Panel | Slate grey tile-effect sandwich panels |
| Material | Pre-painted galvanised steel sheet |
| Thickness | 0.50 mm |
| Colour | Slate grey, matching the slate grey tile-effect panel |
| Piece length | 3 m |
| Sold | By the linear metre |
| Availability | Made to order. |
| Fixing | Flashing screws |

Measure the total length of the joint you need to cover, in metres. Each piece is 3 m long and overlaps the next one by about 10 cm, so it covers about 2.9 m. Divide the length by 2.9 and round up. For example, for 12 m you need 12 ÷ 2.9 = 4.1, that is, 5 pieces.
If your project needs a different girth, another colour or a special fold, we make the flashing to measure. Send us a sketch with the dimensions and we will prepare a quote.
The edge that sits on the panel is cut to the shape of the ribs. The flashing fits the profile and closes the gaps without extra pieces.
On a dual-pitch roof the top is closed with a ridge flashing. The head wall flashing is for mono-pitch roofs that end against a wall.
See also all sandwich panel flashings. Need a price? Ask for a quote or call us on +34 699 147 762 · WhatsApp.
YOU MAY ALSO BE INTERESTED IN
ON-SITE SERVICE
We quote for new builds, refurbishment, roof and facade replacement, flashing installation, and work with sheet metal or skylights.
The quote depends on geometry, height, access, auxiliary equipment, location, fixings and junctions the job must resolve.