973 228 164 · 699 147 762

Support Phone Number

SANDWICH PANEL CATALOGUE

Facade sandwich panel flashings

Consult available products, compare models, and request a quote for quantities, special lengths, transport, or installation.

CATEGORY PRODUCTS

Choose your model and request a quote

Ver por tipo:

CATEGORY INFORMATION

Features, applications and selection criteria

Façade sandwich panel flashings — Pre-painted steel flashings for finishing sandwich panel façades and partitions: inside and outside L-shaped corners, copings and U-profiles for bases, heads and openings. 0.6 mm galvanised steel, in 3 m pieces and in the panel colours.

Flashings for each façade joint

Joint Flashing Reference
Outside corners and edges Outside L 5 × 5, 5 × 7 and 10 × 10 3023 / 3025 / 3020
Inside corners Inside L 5 × 5, 5 × 7 and 10 × 10 3024 / 3026 / 3019
Tops of walls and parapets Coping 3017
Bases, heads, edges and openings U-profile for 30, 40, 50 and 60 mm panels 3000

Features of the façade flashings

  • 0.6 mm pre-painted S250GD galvanised steel.
  • 3 m pieces, sold by the linear metre.
  • In the façade panel colours: the most common in stock, the rest made to order.
  • Also for door and window openings: the L-flashings cover jambs and heads.

How to choose the corner size

The sizes are the legs of the angle in centimetres. The 5 × 5 is the most discreet; the 10 × 10 covers more and hides uneven cuts better; the 5 × 7, with one longer leg, is for when one face needs more cover than the other, for example when the panels of the two façades do not stop at the same distance from the corner.

Installation tips

  • On vertical corners start at the bottom and work up, so each upper piece laps over the one below.
  • Fix with flashing screws every 30–50 cm and seal the overlaps.
  • Plan the flashings together with the panel layout: cuts stay hidden and lines stay straight.

Complete the façade

See the façade sandwich panel, the rock wool panel, all flashings and the screws.

Frequently asked questions about façade flashings

What is the difference between the inside and outside L-flashing?

The inside one goes in inside corners, where the angle points inwards; the outside one on projecting corners and edges.

What is the U-profile for?

It wraps around the panel edge at bases, partition heads, free edges and openings, and protects the insulation.

Can you make made-to-measure flashings?

Yes, with another girth, colour or fold. Send us a sketch with the dimensions.

Need a quote?

Send us the dimensions of the job or a sketch and we will prepare the materials list. Write to us from the contact page or call +34 699 147 762.

PERSONALISED QUOTE

Request a price for sandwich panel

Tell us the panel type, area, thickness, location and whether you need supply only or installation. We’ll review the details to prepare a tailored proposal.

SANDWICH PANEL SERVICE

Supply, transport and specialised installation

In addition to the product, we can quote for flashing, fixings, sealing, skylights, transport and auxiliary equipment.

The final selection should consider use, thickness, spacing between supports, loads, exposure environment and project requirements.

A service tailored to each project

Technical advice

Help choosing the panel, thickness, finish, fixings and flashing.

Shipping throughout Spain

Transport coordinated according to lengths, quantities, destination and unloading.

Project-based quote

Price tailored to the product, quantities, accessories, transport and installation.

Specialist installation

Assessment of auxiliary equipment, flashings, junctions and work sequence.

OTHER CATEGORIES

Explore all types of sandwich panel

Go straight to the main panel and sheet metal families available.

Tile-effect sandwich panel

Residential finish for homes, porches and refurbishment.

Roof sandwich panel

Insulated panel for industrial, agricultural and residential roofs.

Facade sandwich panel

Vertical cladding with visible or concealed screws.

Agropanel for farms

Agropanel for livestock and agricultural environments.

Cold room sandwich panel

Solution for cold rooms and temperature-controlled spaces.

Rock wool sandwich panel

Options with specific fire and acoustic performance.

Wood sandwich panel

Insulation and a natural decorative look.

Corrugated metal sheet

Lightweight profiles for roofs and enclosures.

ON-SITE SERVICE

Specialist team for sandwich panel installation

We quote for new builds, refurbishment, roof and facade replacement, flashing installation, and work with sheet metal or skylights.

The quote depends on geometry, height, access, auxiliary equipment, location, fixings and junctions the job must resolve.

Sandwich panel installation on site