973 228 164 · 699 147 762

Support Phone Number

Made to measure

Technical advice

Delivery to site

Specialist installation

SANDWICH PANEL · CONFIGURATION AND QUOTE

Sandwich Panel Screw – Wood

Configure your panel

Select the available options. We will prepare the price based on dimensions, quantity, transport and installation.

PERSONALISED QUOTE

Request a price for this product

Tell us the panel type, area, thickness, location and whether you need supply only or installation. We’ll review the details to prepare a tailored proposal.

QUICK REQUEST

Tell us what you need

Complete the main details and we will prepare a proposal tailored to your project.

Description: Sandwich Panel Screw – Wood

Screw for fixing sandwich panels to timber purlins, beams and battens. It has a wood thread and a sharp point, so it goes in without pre-drilling and grips the structure firmly.

Characteristics

TypeTimber screw, hex head
SubstrateTimber purlins, beams and battens
Pre-drillingNot needed
Socket10 mm
MaterialZinc-plated steel
SoldBy the unit

Sizes

Choose the length by adding the panel thickness at the fixing point and the part that has to go into the timber. As a guide, leave at least about 4 cm of thread in the wood. Tell us the panel thickness and we will tell you the right size.

How to install it

Sandwich panel screw for wood driven through the panel into the timber beam
Fixing diagram on a timber beam.
  1. Mark the position of the purlins or battens on the panel.
  2. On roofs, place the screw on the crown of the rib.
  3. Drive the screw square to the panel, without hammer action and at moderate speed.
  4. Stop when the head is snug, without crushing the panel.

Tips

  • Do not screw too close to the edge of the purlin: the wood may split. Leave a few centimetres of margin.
  • Check that the timber is dry and sound; the screw will not hold in rotten wood.
  • If the structure is pressure-treated timber, ask us about the most suitable coating.

Frequently asked questions

Does it need pre-drilling?

No. The point of the screw opens its way into the wood and goes through the panel sheet without drilling first.

Is it suitable for steel structures?

No. For steel purlins use the purlin screw, and for thick beams the I-beam screw.

See also: Sandwich Panel Screw – Tubes/Purlins · Sandwich Panel Screw – IPN Beam · Sandwich Panel Screw – Concrete · Sandwich Panel Screw – Flashings · all our sandwich panel screws.

Need a price? Ask for a quote or call us on +34 699 147 762 · WhatsApp.

ON-SITE SERVICE

Specialist team for sandwich panel installation

We quote for new builds, refurbishment, roof and facade replacement, flashing installation, and work with sheet metal or skylights.

The quote depends on geometry, height, access, auxiliary equipment, location, fixings and junctions the job must resolve.

Sandwich panel installation on site