973 228 164 · 699 147 762

Support Phone Number

Made to measure

Technical advice

Delivery to site

Specialist installation

SANDWICH PANEL · CONFIGURATION AND QUOTE

Sandwich Panel Screw – Concrete

Configure your panel

Select the available options. We will prepare the price based on dimensions, quantity, transport and installation.

PERSONALISED QUOTE

Request a price for this product

Tell us the panel type, area, thickness, location and whether you need supply only or installation. We’ll review the details to prepare a tailored proposal.

QUICK REQUEST

Tell us what you need

Complete the main details and we will prepare a proposal tailored to your project.

Description: Sandwich Panel Screw – Concrete

Screw for fixing sandwich panels to concrete beams and purlins, such as the prestressed concrete purlins used in many farm and industrial buildings. It taps directly into the concrete, without a plug, in a 5 mm pilot hole.

Characteristics

TypeConcrete screw, hex head
SubstrateConcrete beams and purlins
Pre-drillingYes, 5 mm drill bit
Socket8 mm
MaterialZinc-plated steel
SoldBy the unit

Sizes

Choose the length by adding the panel thickness at the fixing point and the embedment depth in the concrete (usually around 30–40 mm). Tell us the panel thickness and we will tell you the right size.

How to install it

Sandwich panel screw for concrete driven through the panel into the concrete beam
Fixing diagram on a concrete beam, with a pilot hole.
  1. Mark the position of the beams on the panel.
  2. Drill through the panel and into the concrete with a 5 mm bit, a few millimetres deeper than the screw will go.
  3. Clean the dust out of the hole.
  4. Drive the screw without hammer action until the head is snug, without crushing the panel.

Tips

  • Drill the panel without hammer action and switch it on only when you reach the concrete: that way you will not deform the sheet.
  • Do not make the hole bigger than 5 mm: the screw would lose grip.
  • Keep the edge distance to the beam set out in the project so the concrete does not crack.

Frequently asked questions

Does it need a plug?

No. The screw cuts its own thread in the concrete inside the 5 mm hole.

Can it be used in hollow block or brick?

It is not suitable: in hollow materials the screw has nothing to grip. Ask us about the right fixing for that substrate.

See also: Sandwich Panel Screw – Tubes/Purlins · Sandwich Panel Screw – IPN Beam · Sandwich Panel Screw – Wood · Sandwich Panel Screw – Flashings · all our sandwich panel screws.

Need a price? Ask for a quote or call us on +34 699 147 762 · WhatsApp.

ON-SITE SERVICE

Specialist team for sandwich panel installation

We quote for new builds, refurbishment, roof and facade replacement, flashing installation, and work with sheet metal or skylights.

The quote depends on geometry, height, access, auxiliary equipment, location, fixings and junctions the job must resolve.

Sandwich panel installation on site