973 228 164 · 699 147 762

Support Phone Number

SANDWICH PANEL CATALOGUE

Polycarbonate rooflights

Consult available products, compare models, and request a quote for quantities, special lengths, transport, or installation.

CATEGORY PRODUCTS

Choose your model and request a quote

Ver por tipo:

CATEGORY INFORMATION

Features, applications and selection criteria

Rooflights / Polycarbonate — Rooflights and polycarbonate sheets bring natural light into roofs and façades without the need for large glazed areas. In industrial buildings, warehouses and agricultural buildings, a well-planned layout of translucent areas can improve daylighting and reduce reliance on artificial light for part of the day.

Guide to choosing polycarbonate rooflights

This category brings together multiwall and solid polycarbonate and rooflight profiles compatible with certain roofing systems. The choice depends on the transparency you want, strength, insulation, format and, above all, geometric compatibility with the cladding it will be installed in.

In this category you will find solutions for multiwall polycarbonate, solid polycarbonate, roof rooflights. The aim is to make it easier to choose the main product, the supporting structure, the accessories and the finishing details as a coherent whole, rather than deciding on each element in isolation.

Main advantages

Makes the most of natural light in indoor areas.
Clear and opal options to control light diffusion.
Multiwall and solid formats with different performance.
Integration into roofs, façades, canopies and lightweight enclosures.

Most common applications and uses

The right solution depends on the type of building, the environment, the performance required and the geometry of the project. The most common applications include:

Roof rooflights in industrial buildings and warehouses.
Translucent façades and lightweight enclosures.
Farms and agricultural buildings.
Canopies, porches and architectural daylighting solutions.

How do you choose the right solution?

On roofs you need to check the profile, overlaps, thermal expansion and fixing system. You should also check whether the rooflight is compatible with the profiled sheet or sandwich panel being used. Well-detailed junctions prevent leaks and stresses caused by thermal movement.

You should also check the technical data sheets for the specific model and make sure the chosen solution suits the actual site conditions. On projects with structural, thermal, acoustic or fire-protection requirements, the decision must be based on the relevant technical documentation and on the judgement of the project engineer.

Complete the system with the right components
To put together a complete solution you can look at roof sandwich panels, metal sheet, ridge vents and skylights and installation accessories. These internal links let you compare related options and find the accessories you need to finish the installation properly.

Planning, installation and the final result

A good result starts before the material arrives. Measuring accurately, preparing a logical cutting list, arranging unloading and lifting equipment and organising the installation in phases all help to reduce cuts, downtime and unnecessary handling. Coordinating panels, structure, trims and fixings is especially important when parts are made to specific lengths.

At PanelSandwich.org you can compare different product families and ask for advice on specifying the material according to the dimensions, quantities and needs of your project. Where needed, it helps to send drawings, photos or a sketch of the site so that the critical details can be checked more precisely.

Frequently asked questions about polycarbonate rooflights

Is clear or opal polycarbonate better?
Clear lets through the most light and you can see the sky. Opal diffuses the light, does not dazzle and lets in less heat, which is why it is usually preferred in working buildings and warehouses.

Can it be combined with sandwich panels?
Yes. Multi-profile polycarbonate has the same rib profile as the panel or sheet, is fitted in the same run and overlaps with them. For fibre-cement roofs there are dedicated rooflights.

What polycarbonate thickness should I choose?
Multiwall polycarbonate ranges from 6 to 16 mm: the thicker it is, the better it insulates and the stiffer it is. As a guide, thinner sheets for porches and pergolas and thicker ones for industrial roofs.

Can you walk on rooflights?
No. Before going up on the roof, protect them with fall-protection mesh and work clipped on to a lifeline.

Project completed with rooflights
Replacement of a deteriorated glass and sheet-metal roof with a rooflight solution.
Roof renovation at Lleida Public Library

Need to calculate materials or compare options?
Tell us the dimensions, site location, type of application and the performance you need. You can also use the contact page to request a quote tailored to your project.

PERSONALISED QUOTE

Request a price for sandwich panel

Tell us the panel type, area, thickness, location and whether you need supply only or installation. We’ll review the details to prepare a tailored proposal.

SANDWICH PANEL SERVICE

Supply, transport and specialised installation

In addition to the product, we can quote for flashing, fixings, sealing, skylights, transport and auxiliary equipment.

The final selection should consider use, thickness, spacing between supports, loads, exposure environment and project requirements.

A service tailored to each project

Technical advice

Help choosing the panel, thickness, finish, fixings and flashing.

Shipping throughout Spain

Transport coordinated according to lengths, quantities, destination and unloading.

Project-based quote

Price tailored to the product, quantities, accessories, transport and installation.

Specialist installation

Assessment of auxiliary equipment, flashings, junctions and work sequence.

OTHER CATEGORIES

Explore all types of sandwich panel

Go straight to the main panel and sheet metal families available.

Tile-effect sandwich panel

Residential finish for homes, porches and refurbishment.

Roof sandwich panel

Insulated panel for industrial, agricultural and residential roofs.

Facade sandwich panel

Vertical cladding with visible or concealed screws.

Agropanel for farms

Agropanel for livestock and agricultural environments.

Cold room sandwich panel

Solution for cold rooms and temperature-controlled spaces.

Rock wool sandwich panel

Options with specific fire and acoustic performance.

Wood sandwich panel

Insulation and a natural decorative look.

Corrugated metal sheet

Lightweight profiles for roofs and enclosures.

ON-SITE SERVICE

Specialist team for sandwich panel installation

We quote for new builds, refurbishment, roof and facade replacement, flashing installation, and work with sheet metal or skylights.

The quote depends on geometry, height, access, auxiliary equipment, location, fixings and junctions the job must resolve.

Sandwich panel installation on site