973 228 164 · 699 147 762

Support Phone Number

Sandwich panel thickness: what thickness to choose depending on use

Rietveld Schröder House under construction with trees in the background

Sandwich panel thickness typically ranges from around 30–40 mm up to 200 mm. As a guideline: 30 mm for sheds and enclosures with no thermal requirements, 40–50 mm for warehouses and industrial buildings in mild climates, 60–80 mm for the food industry and homes (for a home roof, a minimum of 60 mm is recommended), and 100 to 200 mm for cold rooms and freezer rooms.

The exact thickness depends on the temperature you want to maintain inside, the local climate, the core type, energy regulations, and the span between supports. More thickness means more insulation and more rigidity, but also a higher price. The idea is not to fall short and not to overpay.

Guideline thickness table by use

Use Guideline thickness Goal
Sheds, temporary enclosures, separating areas 30 mm Basic insulation
Standard logistics warehouse 40–50 mm Basic protection and comfort
Industrial buildings and garages in a mild area 50 mm Medium insulation
Home roof From 60 mm; more in cold climates Residential comfort
Food industry 60–80 mm Strict temperature control
Cold rooms and freezer rooms 100–200 mm Maintain extreme cold

These are reference values. The final thickness comes from a thermal calculation for your specific case.

What determines the thickness you need

  1. Use of the space and indoor temperature. It’s not the same to have an unheated warehouse as a home or a freezer room. The higher the temperature you want to maintain in winter, or the lower in a cold room, the more thickness you need.
  2. Local climate. Look at the usual minimum and maximum temperatures and how long winter lasts. Areas with extreme temperatures call for more thickness.
  3. Energy regulations. In Spain, the Building Technical Code sets requirements by climate zone. The technical project calculates the required thermal transmittance and, from that, the thickness.
  4. Core type. At the same thickness, not all cores insulate the same. We cover it below.
  5. Span between supports. Un panel más grueso es más rígido y permite separar más las correas.
  6. Noise. Si necesitas aislamiento acústico, el núcleo y el espesor también cuentan.

Facade panel thickness vs. roof panel thickness

The roof usually needs one step more thickness than the facade. An example calculation with a mineral wool or polystyrene core, to maintain around 18°C indoors:

  • Area with long, cold winters: around 100 mm on walls and 150 mm on the roof.
  • Area with mild winters: around 80 mm on walls and 100 mm on the roof.
  • Premises kept at around 12°C: 80 mm on walls and 100 mm on the roof may be enough.

With a polyurethane core, which insulates a bit more per centimetre, these values can be adjusted. To see available models and thicknesses, check the sandwich facade panel and the sandwich roof panel.

Thickness and core type: it’s not all about thickness

Two panels of the same thickness can insulate differently depending on their core:

  • Polyurethane (PUR) and PIR. They insulate a bit more per centimetre than rock wool. They let you achieve the same insulation with less thickness. If you’re unsure between cores, read the differences between PIR and EPS.
  • Rock wool. It insulates a bit less per centimetre than polyurethane, but it’s fire-resistant and offers better acoustic insulation. It may need more thickness for the same thermal level. More information in rock wool sandwich panel.

That’s why the thermal calculation takes three data points into account: the type of premises, the climate (heating degree days), and the thermal resistance of the specific panel. With these, it’s decided whether you need 60, 80, 100, 150, 200 mm or more.

Thickness, weight, and structure

A thicker panel weighs a bit more, but with a polyurethane core the increase is small. In conventional structures it usually doesn’t require reinforcement. In return, you gain rigidity: you can space the purlins further apart.

If you need the weight per square metre or the span between supports for a specific model, ask us for its technical data sheet. You’ll find general data in the technical information on panels. And before ordering, review what structure you need.

Thickness and panel dimensions

Thickness is only one of the dimensions. The length of each panel is made to measure for your roof or facade, so you don’t have to adapt the job to standard pieces. To order correctly, measure the roof carefully and take overhangs and overlaps into account. We explain it in how to take sandwich panel measurements.

Is it worth paying for more thickness?

The panel price depends directly on the core volume, so it increases with thickness. Even so, the increase is usually moderate compared to the savings on heating and cooling. Choosing a thickness slightly above the minimum required pays for itself in your bills. What doesn’t make sense is oversizing without a calculation: you’d be paying for insulation you won’t use.

A practical tip: don’t overlap two thin panels to add thickness. It complicates installation and creates thermal bridges. One single piece at the right thickness is always better.

Frequently asked questions

What is the minimum thickness for a roof?

For basic insulation and acceptable rigidity, 30 to 40 mm. For a home, the recommendation is at least 60 mm on the roof.

What panel thickness is used on a facade?

Usually one step less than on the roof of the same building. For example, 80 mm on the wall versus 100 mm on the roof in mild climates, depending on the core.

What thickness does a cold room need?

From 100 to 200 mm. The lower the indoor temperature, the more thickness.

How is the thickness of a ribbed or tile-effect panel measured?

The reference is the thickness of the insulating core, not counting the relief of the ribs or the tile profile. Check it on the technical data sheet for each model.

Does a thicker panel weigh much more?

Not much. With a polyurethane core the weight increase is small and it usually doesn’t require reinforcement.

Not sure what thickness to choose? Request a no-obligation quote or call us on 699 147 762. We’ll recommend the right thickness and core for your job, we manufacture made-to-measure panels and, if you need it, we install them with our installation service.

PERSONALISED QUOTE

Receive a made-to-measure sandwich panel quote

Indicate dimensions, location, application and required service. The more data we have, the better we can adjust the panel, flashings, transport and installation.