As a guide, installing sandwich panels costs between €18 and €25 per m² for assembly alone. If you add the material, a tile-effect sandwich panel roof installed costs approximately between €43 and €67 per m², and a flashing panel roof between €37 and €61 per m². This guide provides indicative prices by panel type, a calculation example, and everything that makes the budget go up or down.
Price of installed sandwich panel per m²
To know how much the installed m² costs, two items must be added: the material (the panel) and the assembly labor. These are the indicative market ranges:
The material price depends on thickness, insulating core, finish, and quantity. We explain this in detail in how much does sandwich panel cost per m²? These are indicative prices: they do not include transport, flashing, screws, structure, or removal of the old roof.
Price of installed tile sandwich panel
The tile-effect panel is the most common in homes, porches, and sheds, and also one of the most sought after. With material from €25 to €42/m² and assembly from €18 to €25/m², the m² of tile sandwich panel installed is around €43 to €67. The range is wide because the price changes significantly with thickness (30, 40, or 50 mm), interior finish (white or wood-slatted), and model (Marseille tile, tile red, slate grey, or aged albero).
Keep in mind that the tile panel requires a minimum slope of 10%, and its length comes in multiples of 0.35 m to match the tile pattern. If your roof does not meet the slope, it is advisable to know this before requesting a quote.
Example: how much a 50 m² roof costs
Suppose a 50 m² roof with tile-effect sandwich panel:
-
•
Material: 50 m² × €25 – €42/m² = between €1,250 and €2,100. -
•
Assembly: 50 m² × €18 – €25/m² = between €900 and €1,250. -
•
Indicative total: between €2,150 and €3,350, plus flashing, screws, and transport.
On small surfaces, the assembly price per m² usually stays at the high end of the range, because team travel and site preparation weigh more. In warehouses and large roofs, it is the opposite.
What makes the installation price go up or down
-
•
Height and access. The higher the building, the more lifting and safety equipment is needed: crane or platform, nets, lifelines, and safety plan. -
–
The panel type. The panel with a foam core (PUR or PIR) is lightweight and fast to assemble. The rock wool one weighs more and needs more equipment. The cold room panel requires sealing joints very well and avoiding thermal bridges, which is why its assembly usually costs more. -
•
Cuts and joints. Rooflights, chimneys, windows, corners, and wall joints lengthen the assembly and increase the flashing needed. -
•
Surface area. The more meters, the lower the price per m². -
–
The state of the structure. If the purlins are not level or at the correct distance, they will have to be corrected first. We explain this in what structure you need for the sandwich panel. -
–
The old roof. Dismantling and removing the existing roof is a separate item. If it is asbestos cement (uralita), removal can only be done by a company registered in the RERA (Register of Companies with Asbestos Risk). We work with a registered collaborator.
What an assembly quote should include
Before comparing prices, check that the quotes include the same:
-
•
Labor for panel and flashing assembly. -
•
Lifting and safety equipment: crane or platform, nets, lifelines, and safety plan. -
–
Screws and fixings suitable for your structure. You can see them in screws for sandwich panel. -
–
Flashing: ridges, sides, wall joints, and corners. You can find them in flashing for sandwich panel. -
•
Joint sealing and finishes. -
•
Waste management and packaging recycling. -
•
Dismantling of the old roof, if applicable.
Two quotes with the same price per m² can be very different if one includes flashing, lifting, and waste removal and the other does not.
Assemble it yourself or with installers?
In a shed, a porch, or a small shelter, the sandwich panel can be assembled on your own with some experience, good tools, and safety measures. You have the steps in how the sandwich panel is installed and fixed and the most common failures in common errors when installing sandwich panel. In warehouses, homes, high roofs, or cold rooms, a professional team is recommended: a poorly fixed or poorly sealed panel ends in leaks and loss of insulation.
Our assembly service
We manufacture the panel to measure and perform the assembly in Catalonia and nearby provinces. To the rest of Spain, we send the material to the site, cut to size and with its flashing and screws. In Portugal, we only supply the material.
Frequently asked questions
How much does the installed sandwich panel m² cost?
As a guide, between €34 and €67/m² for roof panels, facade, and tile-effect panels, adding material (€16 – €42/m²) and assembly (€18 – €25/m²). The cold room panel can reach about €80/m².
How much does it cost to put a 100 m² sandwich panel roof?
With tile-effect panel, between about €4,300 and €6,700 for material and assembly, plus flashing, screws, and transport. With flashing roof panel, between about €3,700 and €6,100.
Does the assembly price include the structure?
No. The assembly refers to placing the panel on an existing structure. If the structure needs to be made or reinforced, it is quoted separately. We sell bolted metal structures through Starmodul.
Is it more expensive to install facade or roof panel?
The assembly per m² is similar. The difference lies more in the material, the height, and the number of openings and corners of each project.
Do you perform assembly throughout Spain?
We assemble in Catalonia and nearby provinces. To the rest of Spain, we send the material, and in Portugal, we only supply.
Want to know how much it would cost you? Send us the project measurements, even in a sketch, the panel type, and the location, and we will prepare the quote with material and assembly. Request a quote without obligation or call us at 699 147 762.
If you are thinking of building, also discover the turnkey industrialized homes from Starmodul.


